Are you facing a difficult time finding the best angle grinder that’s truly worth your hard-earned money?

Don’t worry; we will point you in the right direction, allowing you to handpick the best grinder available these days, of course, without losing your mind in the process.

Spoiler Alert: The one product that really stands out is the Bosch 4-1/2-Inch Angle Grinder. That said, the other angle grinders in the discussion are no less. So, do take a look at them as well.

A Spotlight On Some of The Best Angle Grinder 2020:

BLACK+DECKER Angle Grinder Tool

Amperage: 6 AMP

Voltage: 120 V

Size: 4-1/2-Inch

RPM: 10,000

Weight: 4.49 Pounds

Dimensions: 12.50 x 5.19 x 4.63 Inches

Check Price

Bosch 4-1/2-Inch Angle Grinder

Amperage: 6 AMP

Voltage: 120 V

Size: 4-1/2-Inch

RPM: 11,000

Weight: 3.75 Pounds

Dimensions: 14.40 x 5.20 x 5.20 Inches

Check Price

DEWALT Angle Grinder Tool (DWE402)

Amperage: 6 AMP

Voltage: 120 V

Size: 4-1/2-Inch

RPM: 11,000

Weight: 1.00 Pounds

Dimensions: 15.63 x 5.94 x 4.81 Inches

Check Price

Metabo HPT Angle Grinder Kit

Amperage: 6 AMP

Voltage: 120 V

Size: 4-1/2-Inch

RPM: 10,000

Weight: 4.00 Pounds

Dimensions: 10.15 x 4.50 x 2.00 Inches

Check Price

TACKLIFE 8.5Amp Angle Grinder

Amperage: 6 AMP

Voltage: 120 V

Size: 4-1/2-Inch

RPM: 12,000

Weight: 6.89 Pounds

Dimensions: 14.3 x 6.0 x 6.0 Inches

Check Price

BLACK+DECKER Angle Grinder Tool

The BLACK+DECKER Angle Grinder Tool is an inexpensive angle grinder. At the same time, it offers equivalent performance as other pricier angle grinders sold nowadays. This is to say that you are getting the best bang for your angle grinder’s bucks.

Seriously, this best angle grinder has no match in its price spectrum. The best part is that it’s not too heavy for one-hand use. Plus, it’s easy enough to figure out how to use it. Not to mention that BLACK+DECKER offers a one-year warranty on this angle grinder.

Should something bad happen, you can get the product repaired or replaced for no cost to your wallet. Keep in mind that this angle grinder also comes with a nice metal case to prevent it from getting beat up quickly.

Product Highlights:

This angle grinder is pretty well-made for its price. It has a good weight to it. As advertised, it has a high-quality plastic-built quality to it. Basically, it can tolerate a bit of abuse. Of course, it also performs as it should. It houses a 6-amp motor that gets the job done. It can cut through almost anything. You will also feel safe using it.

Additionally, this angle grinder features a pretty big handle for easy hand-holding. Moreover, it’s not overly loud as other angle grinders sold in the same price range.

Believe it or not, even the quality of the on/off button on this device is up to the mark. Despite the inexpensive pricing, the angle grinder doesn’t feel cheap at all. If you have limited funds, the BLACK+DECKER Angle Grinder Tool should be a no-brainer choice.

Pros:

-The BLACK+DECKER Angle Grinder comes with three and not two handle positions.
-It has a narrow body, which makes it easier than usual to use this angle grinder.
-Unlike other inexpensive angle grinders, this one doesn’t even get hot during extended use.
-This grinder is so affordable that even if you quit using it after a few months, you will have no regrets.

Cons:

-This angle grinder is not meant for heavy-duty use. It’s best for light and moderate use.

Bosch 4-1/2-Inch Angle Grinder

This is another fairly reliable and powerful angle grinder that can put other famous angle grinders to shame. As marketed, it comes with a 6-amp motor that produces a striking power output of 11,000 RPM, which is one of the best RPM outputs for a product of its nature.

Of course, there are other angle grinders with better RPMs. But then, they cost almost twice. Not to discount the fact that this angle grinder from Bosch weighs only 3.75 pounds. Frankly speaking, it’s one of the lightest angle grinders out there.

Also, the handle on this thing can be shifted to the other side. Therefore, you will get a good grip, even if you are a left-handed person. The best part remains the ease of use.

Yes, you will be able to cut/grind with relative use. Needless to say, angle grinders should be taken seriously. So, you are expected to use all the safety gear while working with this device.

Product Highlights:

This angle grinder has all the necessary features in it to take care of the dust/debris. Basically, it swallows a lot of dust/debris that needs to be blown out during everyday use. Another nice thing about this angle grinder is that it vibrates a lot less than other comparable products.

At the same time, it has adequate power for most cutting/grinding tasks. For the money spent, it’s also well-built enough to last longer than equivalent products, which is to say that it will hold up well to everyday abuse. Believe it or not, a lot of past users have commented that they were pretty stoked by the quality of this best angle grinder.

It’s really a ten-on-ten angle grinder for obvious reasons. Therefore, you will be happy to own this product.

Pros:

-Wheel swapping is as quick and easy as it can be. A wrench is included to help you get the job done without any fuss.
-Given how easy it is to use this angle grinder, you will find it less fatiguing to use than other similar products out there.
-You also have the option of keeping the switch ‘on,’ which will allow you to focus on the task at hand while the grinder keeps running.
-The Bosch 4-1/2-Inch Angle Grinder is suitable for both homeowners and professionals.

Cons:

-There are hardly any major downsides to this Bosch angle grinder to crib about.

DEWALT Angle Grinder Tool

If you can spend a decent chunk of money on an angle grinder, the DEWALT Angle Grinder Tool should be on your wishlist. Seriously, this angle grinder has all the nice features that you would expect from the best angle grinder out there. It’s powerful, well-made, reliable, safe, and versatile, all at once.

Simply put, it totally lives up to the brand name and hype surrounding it. Capable of producing an RPM of 11,000, it can be used on a wide variety of tasks.

Thanks to the smart ejection system, this tool is also capable of getting rid of the accumulated dirt/debris without any hiccups. Not to mention that the durable outside casing of this tool allows this device to survive occasional drops. It’s expensive. But then, the quality is definitely up to the mark. As advertised, it works well from day one itself.

Product Highlights:

It’s lightweight, properly balanced, and comfortable to use. Better still, it has more power than what you would need for most home projects out there. The RPM rate stays constant, and this thing doesn’t overheat upon extended use. Speaking about the product longevity, this tool can last much longer than other comparable products, even if you were to use this tool more often than usual.

Truthfully speaking, you can expect this grinder to last for at least five years or more. Keep in mind that DEWALT also offers a three-year warranty on this angle grinder tool. Moreover, it comes wrapped in a nice package to keep up with rough handling, should the package be handled by a reckless delivery guy. So, it’s spot-on in all areas of use. Frankly speaking, five-stars is not enough for a product of this quality.

Pros:

-The DEWALT angle grinder works smoothly with very little vibration on any given day of the week.
-This angle grinder is as ergonomic as it can get. Simply put, it’s enjoyable to be used for long hours at a stretch.
-The trigger locking mechanism is smooth as well. Moreover, it hardly takes any effort to change the guard settings.
-A vast majority of the users have stated that the power of this thing is truly insane. In other words, it’s robust enough for heavy-duty use.

Cons:

-As described earlier, the DEWALT angle grinder doesn’t come cheap. So, this angle grinder is not for everyone.

Metabo HPT Angle Grinder Kit

This is a complete grinder kit. It comes with an angle grinder and a few handy extras that we usually use. For instance, it includes five different grinding disks, saving you the trouble of purchasing them separately. You also get an impressive carrying case.

Better still, the warranty on this best angle grinder kit is pretty much unmatched. Yes, this thing has a longer warranty of five years, which you don’t often see with angle grinders sold in the same price range.

Not to undermine the fact that this is by far the most comfortable angle grinder to handle because of how nicely it’s engineered. Even the switch on this device is located at a nice place. Basically, it doesn’t take a lot of time to get used to this power tool. Of course, it works fine as well. So, it’s not lacking in any area.

Product Highlights:

The Metabo HPT Angle Grinder Kit houses a 6.2amp motor, which translates to an impressive 980 watts power. In other words, it’s a fairly powerful angle grinder. From the first use itself, you will be able to tell that it has a solid motor and bearings on it. The best part is that this angle grinder is light enough for one-hand use.

It won’t wear you down like other bulkier angle grinders out there. Moreover, the handle on this thing can be moved to the left or right based on your preference. It’s also easier to get this thing out of tight spaces because of the compact built quality. Not to mention that it doesn’t sound as terrible as other comparable angle grinders sold nowadays. In other words, the sound volume of this tool is tolerable.

Pros:

-It doesn’t get hot quickly. So, you won’t have to deal with a lot of downtimes during work.
-This angle grinder has a manageable weight to it. Therefore, you won’t need strong or large hands to handle it.
-The makers include a wrench for easy disc change. Also, the included carrying case is quite durable.
-The Metabo HPT Angle Grinder Kit looks fabulous too. You cannot imagine getting a better-looking angle grinder at a similar price point.

Cons:

-The Metabo HPT Angle Grinder Kit is not meant for heavy use. That said, it’s totally fine to use it for light, medium, and, of course, casual uses.

TACKLIFE 8.5Amp Angle Grinder Tool Kit

For the final product, we present to you the TACKLIFE 8.5Amp Angle Grinder Tool Kit. We are not saying that we have preserved the best product for the last. Frankly speaking, the products in this best angle grinder list are included in random order. Most of them are equally good.

In other words, the TACKLIFE 8.5Amp Angle Grinder Tool Kit is no less than its counterparts. Much like others, it’s a high-quality tool that lives up to its advertised claims or marketed benefits. In fact, it’s one of the most powerful angle grinders on this list. For those who don’t know, the 8.5-amp motor on this device can produce an RPM of 12,000, which means that you are not getting a lackluster angle grinder tool kit.

This angle grinder is good enough for most professional cutting and grinding tasks out there. It’s truly built with quality in mind. It can hold on to a lot of use for many years and beyond.

Product Highlights:

The handle on this angle grinder can be switched on both sides, which is to say that it can be conveniently used by right and left-handed folks as well. Also, the handle doesn’t shake a lot. Moreover, the product comes with a bag to keep everything organized inside of it. Everything taken into account, the quality of this angle grinder is definitely better than the price you pay for it.

It’s truly capable of delivering top-notch power despite being small enough for easy handling. Not to mention that it’s also shipped with great care, which you will be able to tell by looking at the product packaging. This angle hinder is, honestly, way better than what you get at a local hardware store.

In fact, it’s a little beast in its own rights. It’s truly built with a lot of thoughtfulness behind it.

Pros:

-The built quality and power capacity of this tool makes it a good enough tool for commercial projects.
-Most of the past shoppers seem thoroughly satisfied with the product’s quality and performance.
-The included carrying case has pockets for storing disc and other accessories.

Cons:

-The process of switching the guards is a bit annoying. This is the only minor annoyance with this product.

Best Angle Grinder: Shopping Guide

Cordless vs. Corded

First and foremost, it’s better to decide whether you want to go with a corded or cordless device.

As expected, the corded ones are suitable for continuous and long-running usage. They are also more powerful than cordless units. Another thing that works in favor of corded angle grinders is the cost. They are usually more affordable.

On the other hand, cordless units are handy when you don’t want to be troubled by long messy wires. Generally, they are more portable, compact, and easier to handle than corded units.

Power

Once you have decided whether you want a corded or cordless grinder, the next thing to focus on is the power capacity of the device. To know how powerful the shortlisted angle grinder is, take a look at the product description.

The most important thing to look at is the RPM (revolutions per minute) capacity. The higher the RPM, the more powerful the angle grinder will be because it will spin faster. The ones we have handpicked for you come with a solid RPM of 10,000 and above. The TACKLIFE 8.5Amp Angle Grinder Tool Kit, in particular, has an RPM of 12,000, which really sets it apart from the competition.

Weight

Pay attention to the weight of the angle grinder as well. The ones that are overly bulky/heavy are usually difficult to handle. Not to mention that they are hard to handle when using them in tight spaces.

On the other hand, the ones that are light and compact are easy to maneuver, even in tight spaces. All of this should tell you that your next angle grinder should be light and compact, both at the same time. The medium ones are also good. But then, refrain from getting an angle grinder that’s overly heavy or bulky.

Dust Management

The shortlisted angle grinder must also feature a good dust management system to take care of the accumulated dust and debris. The good news is that most of the well-made angle grinders come with a nice dust management technology that allows you to enjoy your work to the fullest.

Also, check whether or not the grinder comes with a storage bag. A nice storage bag will help you keep everything organized. The chances are that it will prolong the life of the angle grinder by helping you take good care of it.

Other Features to Look for:

-Ideally, the chosen angle grinder should not be very noisy. Plus, it must not vibrate a lot during use.

-See if the angle grinder can be used conveniently both by the left and right-handed individuals.

-Finally, check whether or not the product comes with a warranty or money-back guarantee.

Conclusion

If you would like to talk about anything related to the best angle grinder, don’t hesitate to comment below. We would surely like to know your views/opinions on this topic.

Like this guide? Then you’d definitely love our other guides on the best MIG welder.

Are you looking for the best MIG Welder that’s available today? Well, you will feel immeasurably better to know that your search ends right here.

In this article, we will introduce you to a few top-of-the-line MIG welders that are totally worth more than the price they are listed at. Seriously, some of the handpicked machines will last for decades with little care.

Spoiler Alert: We would place the Hobart 500553 Handler 210 MVP MIG Welder in the top position because of how excellent it is for its price point. Needless to say, the other four products (discussed below) are equally enticing too. So, take a look at them as well.

A Spotlight On Some of The Best MIG Welder 2020:

YESWELDER Digital MIG-205DS MIG Welder

Amperage: 200 Amp

Dual Voltage: 110/220V

Gas Welding: Yes

Gasless Welding: Yes

Steel Welding: Yes

Stainless Steel Welding: Yes

Aluminum Welding: Yes

Check Price

Hobart 500553 Handler 210 MVP MIG Welder

Amperage: 210 Amp

Dual Voltage: 115/230V

Gas Welding: Yes

Gasless Welding: Yes

Steel Welding: Yes

Stainless Steel Welding: Yes

Aluminum Welding: Yes

Check Price

HITBOX New Arrival MIG Welder MIG250

Amperage: 220 Amp

Dual Voltage: 115/230V

Gas Welding: Yes

Gasless Welding: Yes

Steel Welding: Yes

Stainless Steel Welding: Yes

Aluminum Welding: Yes

Check Price

VIVOHOME Portable Flux Core Wire MIG 130 Welder

Amperage: 110 Amp

Dual Voltage: 110/220V

Gas Welding: Yes

Gasless Welding: Yes

Steel Welding: Yes

Stainless Steel Welding: Yes

Aluminum Welding: Yes

Check Price

Hobart 500559 Handler 140 MIG Welder 115V

Amperage: 140 Amp

Dual Voltage: 115/220V

Gas Welding: Yes

Gasless Welding: Yes

Steel Welding: Yes

Stainless Steel Welding: Yes

Aluminum Welding: Yes

Check Price

YESWELDER Digital MIG-205DS MIG Welder

If you need a reliable welder for home projects, it can’t get any better than the YESWELDER Digital MIG-205DS MIG Welder. Believe it or not, this MIG welder is so light and small that you can operate it with just one hand. Given its small size, you can also store it easily anywhere you like.

At the same time, it’s plentifully powerful for its purpose of use. You will be able to weld even eight-inch rods with this tool without any hiccups. This thing also has a digital amp reader on it.

Keep in mind that the amp reader is not off, which you don’t usually see with machines of this nature. Plus, it’s not too difficult to remember all the settings on this tool, which is to say that it doesn’t take a lot of time to get used to it. It lacks a decent product manual, though.

Product Features:

The built quality of this MIG Welder is surprisingly very good. Even the cables, clamp, and handle are of superb quality. Of course, they are not industrial quality. But then, they are certainly sturdy enough for the product’s price point. Not to mention that it works well right out of the box. The best part is that it can run smoothly both on 110v or 220v power outlets.

That said, it’s made for small jobs around the house. Professional welders will have to look for something more expensive than this MIG welder. So as long as your expectations are reasonable, there’s no way you will hate this MIG welder for what it is. On the contrary, this thing will exceed your expectations on most fronts.

Good Things:

-This best MIG welder arrives in top-notch condition. The outer box is sturdy enough to protect it from any damage.
-Many of the past customers have commented that they couldn’t believe how well this welder worked.
-It’s relatively lighter and smaller than other best MIG welders sold nowadays with hardly any difference in performance.
-The YESWELDER MIG Welder comes with a one-year warranty. Better still, you can extend the warranty to four-years by paying a reasonable amount.

Bad Things:

-It’s a bit cumbersome to put together this MIG welder because the associated instruction is not up to the mark.

Hobart 500553 Handler 210 MVP MIG Welder

The Hobart 500553 Handler 210 MVP MIG Welder is truly a product for folks who want one of the best MIG welders that the market has to offer. Seriously, this MIG welder is a beast at every level. Not only does it operate nicely, but it’s made out of the finest parts and components out there.

This is to say that it’s built to please you like nobody’s business. Of course, it’s billed in accordance with the quality. This implies that you won’t get it at a low price. You will have to open your wallet a bit more than usual to procure this high-quality machine.

Basically, this MIG welder may not suit the budget of financially conservative folks out there. It’s only for those who are willing to drop a decent chunk of money for a ‘better’ MIG welder.

Product Features:

It’s easily one of the most powerful MIG welders that you can get for home use. As advertised, it can handle most jobs without reaching its limits. Believe it or not, it can weld 24-gauge steel (up to 3/8-inches thick) like a champ. Not to discount the fact that the arc is smooth and the penetration is superb.

Basically, no assignment will be too big for this power tool. At the same time, it’s fairly light for ease of carrying from one job site to another. Needless to say, this MIG welder comes with everything required to get started. You won’t have to buy anything extra. As it’s easy to tell by now, it’s definitely a five-star quality product that will win most hearts on any given day.

Good Things:

-As advertised, this MIG welder is monstrously powerful for home use. And, there’s nothing cheap about this machine.
-It’s deceptively light for a powerful machine of its nature. Also, the included settings are easy to master.
-It offers seven different voltage settings, which should tell you how versatile this MIG welder is.
-It also features a fan that does a wonderful job of keeps this device cool. Moreover, it’s not annoyingly noisy like other similar machines out there.

Bad Things:

-As hinted earlier, the Hobart 500553 Handler 210 MVP MIG Welder doesn’t come cheap.

HITBOX New Arrival MIG Welder

If you need a MIG Welder from time to time, the HITBOX New Arrival MIG Welder should be on your wish list. This machine is not only affordable, but it also works very well. Not to mention that it’s easy to use too. Plus, it’s physically small enough to be easily carried around without any fuss. To help you purchase this device with extreme confidence, the company also provides a 1-year warranty on this best MIG welder.

Everything considered; this is easily one of the best 250-amp MIG welders you can find in its price range. Of course, there are better MIG welders out there. But then, they cost far more. So, it’s totally worth taking a chance on this product on any given day.

Product Features:

As marketed, this little machine comes with a chore of adjustable settings. It penetrates perfectly too. All the controls for varying functions are easy to use as well. Given how well-made and versatile it is, it can be considered by beginners, home users, and even hardcore professionals. Basically, it’s a good machine for daily use. The customer support is top-notch as well.

Seriously, the responsiveness of HITBOX’s customer support team is second to none. No other company in its product category can come close to beating it in the area of customer support. For all these reasons, many past shoppers have commented that this MIG welder is truly a diamond in the rough. According to them, every household should own this wonderful power tool.

Good Things:

-Their customer support team is awesome. They do their best to troubleshoot and fix the issue at hand.
-Given the affordable pricing, the HITBOX New Arrival MIG Welder won’t have a major impact on your wallet.
-Despite the low-cost, this power tool has the old-school built quality to it. In other words, it’s a long-lasting device.
-The packaging is also solid. Therefore, this machine won’t reach your place in a beat-up condition.

Bad Things:

-Novice users may take a little bit of time to understand the voltage and amp combinations.

VIVOHOME Portable Flux Core Wire MIG 130 Welder

This is one of the most affordable welding machines discussed over here. Frankly speaking, the best way to describe this MIG welder is ‘affordable workhorse.’ So, do not assume that the VIVOHOME MIG Welder won’t meet your expectations just because it doesn’t cost a bomb.

Believe it or not, you can truly expect many years of issue-free use from this device. It’s good enough to be used by both beginners and non-beginners. Of course, it won’t survive daily abuse in a commercial environment.

But then, it’s highly suitable for home projects or light use. Frankly speaking, you will be able to fix dozens of things with this MIG welder, which means that this machine will pay for itself in no time.

Product Features:

The VIVOHOME Portable Flux Core Wire MIG 130 Welder has ten different welding speeds to it, allowing you to work with different types of materials without any hiccups. From thick steel, aluminum, and more, this thing can handle it all. Plus, this best MIG welder is as portable as it can get, making it extremely easy for you to lug it around.

Keep in mind that assembling this device is a walk in the park too. In fact, the only assembly needed is to attach the handle to the lid. Can it get any easier than this? The best part is that this MIG welder has a smart overheating protection mechanism to it, which prevents this device from getting damaged from non-stop use. The heating protection light turns on, signaling you to allow the device to cool down for a while before being put to use again.

Good Things:

-The included instructions are not crap. Should you feel stuck at any point, the product manual can come to your rescue.
-The company includes a nice face mask with this order for no additional cost to your wallet.
-It hardly takes any practice to get used to all the features/functions that the device has to offer.
-This MIG welder can run on 120V too, of course, with zero modifications. The cord length is also decent.

Bad Things:

-The VIVOHOME Portable Flux Core Wire MIG 130 Welder is good for light/medium duty projects and not for heavy use.
-The product unboxing will take a bit longer than usual because of the secure packaging.

Hobart 500559 Handler 140 MIG Welder

This is another hit machine from Hobart that has created a lot of waves in the market. With respect to the pricing, it’s a mid-priced MIG welder. So, you don’t have to blow a lot of money on it. At the same time, it performs as good as other high-priced welding machines out there. Therefore, it was a no-brainer decision to include this product in the best MIG welder list.

As advertised, it can weld steel and aluminum of different thicknesses without any hiccups. It has five different voltage options along with a stable arc to deliver the kind of superior performance that you would normally expect from a well-made product of this nature. So, this product is not foreign-made junk. It truly shines in its product category because of its excellent built-quality and performance.

Product Features:

Every component of this MIG welder is sturdier than its competition. Even the gas regulator that comes with the product is nicer than other models from good brands. The product manual is also well-written from start to finish. By looking at the manual, it’s easy to tell that the company has hired Native English-speaking writers to work on the product manual.

Basically, Hobart hasn’t cut corners over here. Keep in mind that the product set up is easy as hell as well. This machine should be up and running in less than thirty minutes of arrival. Not to undermine the fact that the compact and light-built quality of this MIG welder makes it perfect for all your project needs.

Good Things:

-The product packaging is truly solid. It has solid layers of thick cardboard stapled together.
-The wire feed assembly is not made out of plastic. It’s mostly metal, which is really good to know.
-Compared to other equivalent products from good brands, this MIG welder secures an upper edge over its competition.

Bad Things:

-Although it’s not the most expensive MIG welding machine out there, it still costs a decent chunk of money.

MIG Welder Buying Guide

In all fairness, you have the right to explore other products as well. Therefore, we have included below a buying guide that will help you find good quality MIG welders without any issues.

Amps

The amps rating will tell you the suitability of the MIG welder for materials of different thicknesses. For instance, a product featuring 30-40 amp will be suitable for a 1.00mm sheet, but it would be practically worthless for 0.8mm sheets.

The ones used in a commercial environment have 300-amp power, and they do not go below 40 amp. These heavy-duty MIG welders can run all day long without any issues. They cost far more too. Therefore, it’s important to access your needs and accordingly choose a machine with suitable maximum and minimum amps. Also, pay attention to the duty cycle of the shortlisted machine.

Choose a device with a good duty cycle so that you are able to weld for long without any fuss. After all, the ones will low duty cycle requires frequent breaks to prevent the machine from overheating. On the other hand, a MIG welder with a good duty cycle can be operated continuously before a short break.

Brand Manufacturer

When it comes to choosing the best product, brand value matters a lot. It has been cited that machines from no-name brands usually enjoy a long life. The immediate cost for these items may be significantly lower than products from reputed brands.

But then, these low-priced MIG welders won’t last past a year or two, which is to say that your investment in the machine won’t go too far. Therefore, you must have noticed that we have recommended products from reputed brands in our discussion. We know the value these brands bring to the table. The point here is that it helps to get a MIG welder from a good brand, even if it requires some extra spending.

To know whether you are getting a good deal or not, check if the product comes with a warranty. Good brands generally offer a warranty of 1-2 years on a well-made MIG welder. Welders usually get better as you keep increasing your budget. So, allocate a decent budget as well.

110 vs. 220 Volt

Before you take a final call, make sure that you have the right electric outlet installed for the shortlisted MIG welder. Without the correct electric outlet, you won’t be able to put the machine to any use. The good news is that most of the well-made MIG welders out there are compatible with both 110 and 220-volt electric outlets.

For those who don’t know, most households have a 110-volt outlet. This means that if you were to get a MIG welder that can be plugged into your household electric outlet, you would be able to use the device in just about no time.

That said, you need to bear in mind that 220-volt welders are more powerful than your 110-volt welders. For more power, you have no choice but to arrange for a 220-volt outlet installed at your place (if you don’t have one already).

Conclusion

On a final note, we would encourage you to post a comment on this best MIG Welder article so that we know how helpful these heart-to-heart reviews turned out to be.

Like this guide? Then you’d definitely love our other guides on the best backpack blower.

If you are an owner of a small yard or a lawn, you owe it to yourself to get the best backpack blower that the market has to offer. In this article, we will introduce you to some of the finest ones in the market.

Spoiler Alert: If you want to save time, go ahead and get the Makita EB7660TH Backpack Blower. It’s the best overall leaf blower that you can find today.

A Spotlight On Some of The Best Backpack Blower 2020:

Poulan Pro PR48BT Backpack Leaf Blower

Air Speed: 475 CFM at 200 MPH

Cruise Control: Yes

Variable Speed Control: Yes

Adjustable Shoulder Straps: Yes

Power Source: Gas Powered

Weight: 22 Pounds

Check Price

Greenworks 80V 145MPH Backpack Leaf Blower

Air Speed: 580 CFM at 145 MPH

Cruise Control: Yes

Variable Speed Control: Yes

Adjustable Shoulder Straps: Yes

Power: Battery Powered

Weight: 8.12 Pounds

Check Price

Makita EB7660TH Backpack Blower

Air Speed: 706 CFM at 206 MPH

Cruise Control: No

Variable Speed Control: Yes

Adjustable Shoulder Straps: Yes

Power Source: Gas Powered

Weight: 24.1 Pounds

Check Price

PB-770T ECHO 765 CFM Gas Backpack Blower

Air Speed: 756 CFM at 234 MPH

Cruise Control: No

Variable Speed Control: Yes

Adjustable Shoulder Straps: Yes

Power Source: Gas Powered

Weight: 28.0 Pounds

Check Price

Husqvarna 965877502 Backpack Blower

Air Speed: 692 CFM at 230 MPH

Cruise Control: Yes

Variable Speed Control: Yes

Adjustable Shoulder Straps: Yes

Power Source: Gas Powered

Weight: 22.5 Pounds

Check Price

Poulan Pro PR48BT Backpack Leaf Blower

The Poulan Pro PR48BT is a solid option for all the economically conservative folks out there. It may not necessarily satisfy the perfectionist in you. However, it’s not going to upset you. This is to say that you won’t be disappointed with the product if you judge it based on the money spent on it.

It may not be as powerful as other expensive backpack leaf blowers out there. But then, it’s good enough for residential use. Not to mention that you can conveniently alter the speed of this device based on the task at hand. You will also enjoy supreme comfort during use because of how comfortable and easy it is to use this best backpack blower.

Product Highlights:

This backpack leaf blower is easy to set up and use. It’s also much lighter than its counterparts. Better still, the 2-cycle 48cc large engine is strategically positioned for better efficiency. As marketed, it can blow leaves, water puddles, and debris like a champ.

The fact that it works better than expected, it will also save you a lot of time. Above all, this thing doesn’t eat a lot of fuel. Plus, it produces less fumes, which means that it’s not going to have too much of an environmental impact in your neighborhood. So, don’t be reluctant to get this leaf blower. For quick jobs, it can’t get any better than this affordable and efficient leaf blower.

Pros:

-The shoulder straps are highly adjustable. The device also fits nicely on the back.
-The noise level is pretty low in comparison to other corded leaf blowers out there.
-This leaf blower is easy to maneuver because of how effortlessly it fits into a person’s back.
-As hinted earlier, it doesn’t go through the fuel fast. Seriously, you will love the cleanup it does without consuming a lot of fuel.

Cons:

-Although it’s a fairly lightweight device for a product of its nature, it starts to feel a bit heavy after 30-odd minutes.

Greenworks 80V 145MPH Backpack Leaf Blower

The Greenworks 80V 145MPH Backpack Leaf Blower shares many of the fantastic qualities that a high-end leaf blower should possess. This leaf blower is reasonably powerful, lightweight, durable, and hassle-free to operate, all at the same time.

Better still, it houses a brushless motor for steady performance, which is to say that it’s powerful enough for clearing stuff off the driveways, pavements, and backyard. The best part is that you can finetune the power to your liking.

It also has a ‘turbo’ mode to take the blowing power to the next level. Basically, this thing offers three different speed options for operation. Come autumn, and the sales of this leaf blower skyrockets because of how good it really is.

Product Highlights:

This is an electric blower, which equates to quieter operation. Yes, it’s a lot silent compared to a noisy gas blower.

Of course, it will also free you from the trouble of dealing with gas fumes. Another tempting aspect of this product is that it’s quite economical not only in terms of upfront cost but also in regards to maintenance cost. After all, you won’t have to keep buying fuel. Of course, it does have some limitations.

Being an electric unit limits its power output, which means that it’s not as powerful as a gas-powered leaf blower. That said, the power and run-time are too good for a battery-operated device. Simply put, it’s a great device for all the weekend warriors tackling DIY projects.

Pros:

-It runs for a pretty long time. Also, the 80V batteries don’t take too long for a recharge.
-The trigger lock is a nice addition to this blower. You won’t have to keep pressing the trigger to keep the device running.
-Given how light this electric blower is, it makes lawn moving a lot easier than usual.
-This best backpack blower is sturdy enough to last forever in the hands of someone who knows how to take care of his/her power tools.

Cons:

-As described earlier, it’s powerful enough to get the job done. But, it’s not as powerful as a gas blower.
-The battery is a bit difficult to remove. Of course, it becomes dead easy after a few attempts.

Makita EB7660TH 4-Stroke Backpack Blower

If you want to clear leaves from your property, this power tool can be the best investment ever. The Makita EB7660TH Backpack Blower is one of the most powerful backpack blowers in the discussion.

It’s equipped with a 4HP engine that gives it all the power it needs. Believe it or not, it’s able to blow air at an incredible speed of approximately 200 mph. Besides being powerful, it’s pretty fuel-efficient as well.

Furthermore, this blower is impressively quiet for something as powerful as it is. As advertised, the noise level is under 80 dBA. Weight-size, it’s marginally heavy than other comparable blowers out there. However, the comfortable straps make it easy to carry it around despite the heavier weight.

Product Highlights:

The Makita EB7660TH Backpack Blower is a breeze to use, start, and turn off. Not to mention that the controls are within easy reach when the device is on your back. Seriously, it beats many other brands in the area of use.

Given its power, it also gets the job done sooner than usual. Keep in mind that it’s a four-stroke device. It runs far much cleaner than other two-stroke models out there. Plus, it requires less maintenance than them.

Of course, Makita is a trustworthy brand name too. Some of their power tools sell so well that people have to wait for the items to be in stock again. Thankfully, this blower lives up to Makita’s image.

Pros:

-It’s damn powerful. So, it can be used for practically anything that requires a leaf blower.
-It starts almost instantly with minimal effort. Plus, it remains reasonably quiet even at high speed.
-Unlike the competition, the straps don’t slide from your shoulders. They are perfectly engineered for a nice fitting.
-Since it’s a four-stroke model, you don’t have to go through the hassle of mixing oil with gas. You can simply use regular gas.
-According to past shoppers, this blower arrives sooner than what it says it would.

Cons:

-The Makita EB7660TH Backpack Blower can take a toll on your wallet. Given the solid quality, it’s quite expensive.
-As mentioned earlier, the weight of this backpack blower is a bit on the heavier side.

PB-770T ECHO Backpack Blower

This is another powerful leaf blower that can last a long time if properly cared for. Seriously, the product description of this best backpack blower is as factual as it can get. The device is staggeringly powerful, fuel-efficient, and comfortable on the lower back.

The ‘no sweat’ padding on it ensures proper air circulation, allowing a user to stay cool when the device is on the back. Not to undermine the fact that the straps are extra wide on purpose for better user comfort.

Plus, it’s not unusually heavy. The decent weight and comfortable straps really take a lot of pressure off the lower back. Given how well this blower is engineered, it totally deserves all the outstanding ratings it has received.

Product Highlights:

The ECHO Backpack Blower starts very easily, and it never appears to get dirty. Usually, it starts on the very first pull itself. That said, it’s not too quiet. But then, the tone is not overly loud.

A user might need ear protection. However, the neighbors won’t usually mind the noise because they won’t have to deal with the high-pitched screaming of the motor. The tool also allows easy access to the air filtration system should you feel the need to clear some fine particles. Another huge benefit of this blower is the lack of vibration on the trigger and grip area.

Furthermore, this blower can hold a lot of fuel, which is to say that you won’t have to keep refueling it too soon. Most jobs will be completed with one tank. As you can tell, this is truly a ‘wow’ product from ECHO. If you want to make your neighbors jealous, get this blower in a heartbeat.

Pros:

-Equipped with a 79.2cc motor, this best backpack blower is a powerhouse in itself.
-The air volume of this device is something else. It can blow tons of air to help you clean your property quickly.
-Like other similar devices, it has some plastic parts to it. However, the parts are solid enough to not break.
-The handle on this thing is nicely centered, which makes it easy to carry this blower around from one job location to another.
-The included documentation is not horrible, like you often see with similar products. It’s well-written and easy to read.

Cons:

-If you have a modest budget, you will have to look for something else. The ECHO Backpack Blower is quite expensive.

Husqvarna 965877502 350BT 2-Cycle Gas Backpack Blower

If you are looking for a mid-priced backpack blower, it can’t get any better than the Husqvarna 2-Cycle Gas Backpack Blower. Despite not costing as much as other high-end brands, this blower can pack up a powerful punch, which means that it will serve its primary purpose of use without any fuss. It can literally blow away anything.

The overall build quality is above the baseline too. Plus, it’s not too difficult to start. It usually takes no more than 2-3 pulls to get it started. Overall, it’s a great product for quick jobs. Given how well it functions, you won’t find yourself avoiding it. On the contrary, you will look forward to using this best backpack blower.

Product Highlights:

This backpack blower is easy to put on, start, and move with. It also has a handle for ease for carrying when you are not wearing it on your back. And, it’s not terribly noisy as other blowers normally are. Furthermore, this device is light enough to not wear you down during use. Above all, the shoulder straps hold the blower in its place.

Therefore, you won’t have to go through the hassle of readjusting it again and again. The best part is that this blower works wonderfully for many years without you having to do any maintenance work on it. This is to say that you can use it for seasons after seasons without any issues.

Pros:

-Unlike other leaf blowers out there, this one won’t rock or jerk when you start it.
-It features a nice ergonomic handle that can be easily rotated/adjusted to meet your needs.
-According to users, it continues to start on the first few pulls even after many months of use.
-The tank size is better than average, which means that it can hold a decent chunk of fuel.
-The price of this device is perfect for a homeowner who needs a seemingly powerful and durable blower.

Cons:

-It uses quite a bit of fuel during use. So, it’s not as fuel-efficient as other blowers discussed so far.

Best Backpack Blower: Buying Guide

Now that you are familiar with the best backpack blowers that the market has to offer, let’s move on to the buying guide that will walk you through the shopping process.

Power

The primary feature that you need to consider is the power of the leaf blower. After all, the motor power will determine the air output of the device.

For those who don’t know, the air output is represented in mph. Higher mph simply means more power, which translates to more air output. When getting a gas-operated blower, pay attention to the horsepower(cc) of the engine. For electric blowers, check the voltage of the shortlisted leaf blower.

Speed Control

Great power aside, you should also be able to control the blower easily. Most of the well-made blowers allow you to control the speed of the device via a variable throttle, which means that you can increase or decrease the speed/power of the blower based on the task at hand.

This will allow you to use the blower for a wide variety of garden tasks without any fuss. Some of the blowers vibrate a lot during high speed. So, this is another thing that you need to inspect before spending your hard-earned money on a blower.

Battery or Corded

If you are a first-timer, you would be better off with a battery-operated blower because it’s easier to use in comparison to a corded unit. With a corded blower, you will have to go through the trouble of dealing with gas and oil, which can be a hassle for some inexperienced folks out there. Not to mention that cordless models also come with good mobility. Your work area wouldn’t be limited to the length of the cord.

That said, a battery-operated blower has its limitations. For instance, most cordless leaf blowers are not as powerful as their corded counterparts. In a nutshell, weigh the pros and cons of both corded and cordless blowers and choose a product that best suits your needs.

Noise Level

Your yard-obsessed neighbors may not appreciate a noisy blower. So, it helps to inspect the noise level of the shortlisted blower before taking a final call. The good news is that we have carefully shortlisted blowers that aren’t as loud as a noisy fan.

If you are choosing products outside of this list, you may want to read the product description to get a fair idea about the product’s noise level. Look for the term ‘decibels’ in the product description. Decibel depicts the noise level of the blower.

Other Features to Look for

-Check whether or not the fuel tank is transparent. A translucent fuel tank will make it easy for you to keep an eye on the fuel level at a glance. Of course, this is not a compulsory feature to look forward to. In other words, it’s easy to live without this feature.

-Check how effortless it is to start, use, and carry the backpack blower. Pay special attention to the weight of the blower too. If it’s too heavy, carrying it around will prove to be a back-breaking affair. Also, if it takes too many tries to start, it may cause you a lot of frustration.

-Our final suggestion is that do not go for blowers from no-name brands. They usually don’t last as long as blowers from reputed brands. So, be wise with your money and spend it on a well-made leaf blower from a reputed brand/company that has been around for long enough to win your trust.

Conclusion

What are your thoughts on the best backpack blowers handpicked by us? If you would like to share anything, make it a point to comment below.

Like this guide? Then you’d definitely love our other guides on the best pole saw.

When searching for the best track saws in the market by yourself, you will find plenty of them. However, each one of them may not be worth your money. Now that you are reading this post, let’s introduce you to the best ones out there.

Spoiler Alert: The Bosch Tools Track Saw – GKT13-225L 6-1/2 In. Precision Saw is so good that you will start believing that there’s not much luck involved in shopping for the best track saw in today’s age and time.

A Spotlight On Some of The Best Track Saws 2020:

SHOP FOX W1835 Track Saw

Amperage: 9 AMP

Voltage: 120 V

RPM: 5500

Weight: 18 Pounds

Dimensions: 10.63 x 13.38 x 9.50 Inches

Check Price

DEWALT DWS520K Track Saw Kit

Amperage: 12 AMP

Voltage: 120 V

RPM: 4000

Weight: 18 Pounds

Dimensions: 12.38 x 18 x 12.13 Inches

Check Price

Bosch Tools Track Saw GKT13-225L

Amperage: 12 AMP

Voltage: 120 V

RPM: 4000

Weight: 10 Pounds

Dimensions: 14.4 x 9.5 x 9.45 Inches

Check Price

Festool 575389 Plunge Cut Track Saw

Amperage: 12 AMP

Voltage: 120 V

RPM: 3550

Weight: 13 Pounds

Dimensions: 11.61 x 15 x 16.73 Inches

Check Price

Makita SP6000J1 Circular Saw

Amperage: 12 AMP

Voltage: 110 V

RPM: 5200

Weight: 17 Pounds

Dimensions: 75 x 14.75 x 24.25 Inches

Check Price

SHOP FOX W1835 Track Saw

If you can’t afford track saws from big-name brands, you can consider the SHOP FOX W1835 Track Saw in a heartbeat. Thankfully, the price of this track saw is well below what other best track saws companies are charging for equivalent models.

At the same time, its performance is at par with other models aimed towards occasional woodworkers. At the highest setting, it’s able to deliver an RPM of 5000, which is not bad for a low-priced track saw of this nature.

It’s fairly lightweight too. So, you won’t strain your arms from using it for too long. Not to mention that you will also find it easy to transport it from one job site to another.

Product Highlights:

As advertised, the setup of this track saw is stupidly quick and easy. It’s also remarkably easy to adjust this tool to do many things without any fuss.

Of course, it cuts very well too. Yes, the track saw has enough power to make straight cuts quickly and smoothly. It may not be as well-built as a DEWALT or a Makita version of this tool, but it can last seemingly long upon proper care.

The dust collection system of this track saw is also very good for something that costs half the price of a DEWALT or Makita track saw. Given the low asking price, most people will tolerate the minor flaws that this product has.

Pros:

-This track saw is proficiently packed at the time of shipment to prevent damage during transit.
-It also comes with all the necessary instructions on how to use and handle the track saw safely and efficiently.
-As described before, the SHOP FOX W1835 Track Saw is easy to lug around from one job site to another because of its lightweight.
-Given its low price and usability, this track saw will pay for itself. You might just have to do a few small jobs to recoup your investment.

Cons:

-Compared to other expensive track saws, the SHOP FOX W1835 Track Saw is a bit underpowered.
-Future buyers should also know that the stock blade is not of the finest quality. It’s good enough to get started, though.

DEWALT DWS520K 6-1/2-Inch Track Saw Kit

As expected, DEWALT hasn’t disappointed the masses. The DEWALT DWS520K 6-1/2-Inch Track Saw Kit lives up to the brand image. It’s a powerful track saw that’s equipped with 12A, 1300W motor, which can deliver straight cuts in both directions.

With a good blade combination, it can power through thick materials like there’s no tomorrow. Great power aside, the saw can get the job done with fantastic precision and accuracy. This electric-powered track saw also has a splendid kickback mechanism to it, which will help you stay injury-free. The length of the cord is beyond average as well, which eliminates the need to invest in an extension cord.

Product Highlights:

This track saw kit is not too difficult to set up and use. But then, you have to spend quality time with the product manual to ensure that the tool works great from the very first attempt. That said, the product manual explains everything very well.

Frankly speaking, it’s almost impossible to mess up if you read the instructions clearly. The best part is that this track saw is quieter than other similar products, and it comes with an outstanding dust collection system.

The dust system really does a good job of keeping the shop pretty clean and dust-free. The blade can be changed in a jiffy as well. Not to undermine the fact that the on/off switch on this device is located at a nice place for ease of handling.

Pros:

-Unlike the competition, this track saw doesn’t vibrate a lot during use, which means that your cut accuracy won’t get affected.
-Given the powerful motor, this track saw won’t have trouble cutting anything that you may have in your shop.
-The DEWALT DWS520K 6-1/2-Inch Track Saw Kit carries a three-year limited warranty. Plus, you get a 90-day money-back guarantee.
-Reviews suggest that this track saw is good enough to last for many years and beyond, despite being put to frequent use.

Cons:

-The quality control seems to be poor on the depth adjustment mechanism. The adjustment knob is a bit difficult to turn.
-The item comes with a plastic storage bag. The makers should think about improving this as well so that users can store the product safely for long.

Bosch Tools Track Saw – GKT13-225L 6-1/2 In. Precision Saw

This track saw is sturdy, powerful, amazingly accurate, and a great joy to use. Unlike most other track saws that feature a 12-amp motor, this saw boasts of a 13-amp motor that delivers an output of roughly around 5000 RPM.

This is to say that this track saw is capable of handling most woodworking projects out there. In other words, it can cut thick and hard materials, too, without struggling or jamming in between. Better still, it’s equipped with a fantastic plunge system, which allows you to make precise and accurate cuts like nobody’s business.

Of course, it’s pricier than your average track saw. But then, this Bosch tool is totally worth the additional expense. In fact, product reviews suggest that it’s a more likable product, despite the higher asking price.

Product Highlights:

The Bosch Tools Track Saw – GKT13-225L 6-1/2 In. Precision Saw comes with a nice overload protection mechanism, which prevents the tool from heating to the point of damage. Something else that’s worth mentioning over here is that the dust collection feature of this tool does a great job of sucking all the dust produced during use.

You will also be pleased to know that the makers include a wonderful carrying bag to store this item. The included bag comes with side pockets to keep the connectors and clamps. As you can tell by now, this track saw totally justifies its asking price in all regards.

So, there’s no reason to pass this product for other lackluster options. They may come cheap, but they won’t last as long as this track saw.

Pros:

-As hinted earlier, the Bosch GKT13-225L Track Saw is powerful enough to rip through hard materials like a true champ.
-It’s built very well for its asking price. In fact, it’s one of the most durable track saws in our best track saws product list.
-The track saw is good enough for both home and commercial use. Basically, it can keep up to heavy use as well.

Cons:

-As explained earlier, the Bosch Tools Track Saw – GKT13-225L Track Saw doesn’t come cheap.

Festool 575389 Plunge Cut Track Saw

This is the most expensive track saw in the discussion. Therefore, this track saw may not suit a budget shopper’s wallet. It’s meant for those folks who want to settle for nothing less than a powerful and feature-rich track saw. For those who are not aware, the Festool 575389 Plunge Cut Track Saw excels in the area of both speed and power.

Although it houses a typical 12-amp motor, it’s capable of achieving a maximum speed of roughly 3200 RPM, which is along the lines of other best track saws sold these days. Given its solid construction, you can also trust this track saw to last long in your possession, despite rough handling. For all the reasons discussed above, you will have no regret spending some extra bucks on it.

Product Highlights:

The Festool 575389 Plunge Cut Track Saw is easy to use, even for first-timers. The included instruction manual tells you everything about the product’s use in a very precise and nice manner. Not to discount the fact that this track saw comes with an integrated spring-loaded knife that does a great job of keeping the cut material away from the back of the blade, which means reduced chances of kickback.

This also means better user control. This is to say that you can expect more precise and accurate cuts from this track saw. Frankly speaking, the level of engineering that has gone into the making of this product is really praiseworthy, to say the least.

Pros:

-The accuracy of this track saw is second to none. It does a better job than other competing track saws sold nowadays.
-Given the superb engineering, this track saw will never fail you, as confirmed by a host of past purchasers.
-This track saw comes with a hard case, which makes it very easy to transport and store this item on any given day.

Cons:

-The Festool 575389 Plunge Cut Track Saw doesn’t come at a frugal price. It’s an expensive item.

Makita SP6000J1 6-1/2 in. Plunge Circular Saw Kit

As frequent power tool shoppers may already know, this handpicked list of the best track saws would have been grossly incompletely without us recommending a track saw from Makita. Of course, the Makita SP6000J1 6-1/2 in. Plunge Circular Saw Kit didn’t get a positive nod from us solely based on the brand name. It truly is worth a recommendation.

It features a 12-amp motor that can generate an RPM of 5200. Seriously, this saw is powerful enough to cut through anything. Plus, it’s adjustable, which is to say that you can set the RPM to a lower or higher setting based on the project at hand.

The length of the track is very generous, too, enabling the tool to keep the blade really steady during cuts, which will help you make accurate cuts. Truly, this thing is totally engineered for precision work.

Product Highlights:

The makers include a good quality blade with the saw kit. The stock blade is a 48T, which can handle cuts very well. Moreover, the tool has a soft start to it. And, it’s remarkably noiseless during use. Not to mention that the track stays very still without the clamps, even on slippery panels. Plus, this thing is not heavy or cumbersome like other equivalent track saws out there.

Of course, you can find cheaper saw kits in the market. However, very few of them can come close to matching the power, accuracy, ease of use, and durability of this track saw. So, if you are looking for a high-quality track saw that can last long, get this one without any reservations. Seriously, you won’t end up with any regrets.

Pros:

-The Makita SP6000J1 6-1/2 in. Plunge Circular Saw Kit will get the intended job done faster with less dust and hassle.
-The track saw comes with a handy switch, which makes it a breeze to change the speed of this tool.
-The included instructions have very good pictures in reference to what is talked about in the manual.
-This track saw is good enough to be used in a commercial environment. It has the power, durability, and versatility to it.

Cons:

-It doesn’t have a raving knife. That said, this may not be needed by most folks considering this track saw.

Best Track Saws: Buying Guide

If you want to look past these handpicked track saws and find something on your own, we suggest that you read all the pointers given below.

Motor Capacity

As they say, a power tool is as good as its motor. In other words, the motor is one of the primary things that you need to focus on when shopping for the best track saws in the market. Generally speaking, the larger the motor, the more powerful the saw will be.

That said, track saws with powerful motors usually cost more than your average track saws. However, you don’t need the most powerful track saw for home projects. A 9-amp motor from a good brand will work well for most home projects.

Bevel Capacity

Many people focus only on the motor power and not on the bevel capacity of the track saw, which limits a user’s ability to make precise and accurate cuts. Most track saws sold these days can only make straight cuts or at 90 degrees.

They fail to make angled cuts. If you aim to use your track saw for a wide variety of woodworking projects, you should choose a device that’s capable of making angled cuts. The ones that come with a 45-degree bevel capacity should be the best choice over here.

RPM Capacity

Ideally, you should pay attention to the RPM of the track saw too. It’s the maximum speed that the saw’s blade will spin at, which will determine how good the shortlisted track saw will be at cutting materials of different types and thicknesses.

Gladly enough, most track saws from leading brands come with at least 2000 RPM, which should be good enough for cutting all the thin materials in a typical workshop. Of course, the best saws also provide you with the ability to adjust the RPM, enabling you to go slow or fast, depending on the material to be cut.

Cord Capacity

Not all cords are created of equal length. Unfortunately, some track saws feature cords with short lengths, which can hinder your ability to use the saw as efficiently as you may like. Therefore, it’s highly advisable to choose a track saw that features a cord that’s long enough for most uses.

Needless to say, you can always invest in an extension cord to make up for the short cord length. But, this would require additional investment from your part. To avoid this unnecessary expense, choose a track saw that comes with a lengthy cord in the first place.

Safety Features

Whether you are a beginner or a professional woodworker, safety should be your top priority. The shortlisted track saw must have all the necessary safety features to keep you protected from accidental damages.

For instance, it must feature a blade guard to protect you from the sharp blade when the track saw is not in use. Additionally, it must have an anti-kickback feature to minimize the odds of kickback during use. The dust collection system would be an added bonus, which will keep your shop clean whenever the track saw is put to use.

Battery vs. Non-Battery

Needless to say, battery-powered track saws are more convenient to use. Not to mention that they are highly portable too. However, they usually cost more than the corded track saws out there.

So, you will have to factor the extra cost involved in procuring a cordless track saw. Also, keep in mind that you might need an extra pair of batteries for longer and time-consuming projects, which will, obviously, put some additional load on your wallet.

Conclusion

If you have any serious doubts, suggestions, or queries regarding our selection of the best track saws, do drop a comment below.

Like this guide? Then you’d definitely love our other guides on the best drill pressess.

Today, you will find out the best drill presses of 2020. You will also be aware of the various factors that determine the shopping process.

Spoiler Alert: Although all the recommended drill presses are equally good, the DeWalt DWE1622K 2-Speed Magnetic Drill Press is more powerful than the rest.

A Spotlight On Some of The Best Drill Presses 2020:

WEN 4214 Variable Speed Drill Press

Amperage: 2.3 Amps

RPM: 750-3140

Number of Speeds: 5

Chuck Size: 1/2-Inch

Drill on Center: 10-Inches

Tilting Work Table: 0-45 Degrees

Check Price

SKIL 3320-01 3.2 Amp 10-Inch Drill Press

Amperage: 3.2 Amps

RPM: 750-3050

Number of Speeds: 5

Chuck Size: 1/2-Inch

Drill on Center: 10-Inches

Tilting Work Table: 0-45 Degrees

Check Price

DeWalt DWE1622K Drill Press

Amperage: 10 Amps

RPM: 300-450

Number of Speeds: 5

Chuck Size: 1/2-Inch

Drill on Center: 10-Inches

Tilting Work Table: 0-45 Degrees

Check Price

Shop Fox W1667 Drill Press

Amperage: 3.2 Amps

RPM: 620-3100

Number of Speeds: 5

Chuck Size: 1/2-Inch

Drill on Center: 10-Inches

Tilting Work Table: 0-45 Degrees

Check Price

WEN 4208 5-Speed Drill Press

Amperage: 3.2 Amps

RPM: 740-3140

Number of Speeds: 5

Chuck Size: 1/2-Inch

Drill on Center: 10-Inches

Tilting Work Table: 0-45 Degrees

Check Price

WEN 4214 12-Inch Variable Speed Drill Press

The WEN 4214 12-Inch Variable Speed Drill Press has the best features for its asking price, which should explain why this product made it to this best drill presses list. As advertised, it arrives quickly, it assembles quickly, and it works beautifully.

You will truly enjoy the buttery smooth performance of this device. In fact, you will get so accustomed to it that you will use it extensively, whenever the opportunity presents itself. Of course, it doesn’t vibrate like crazy.

The noise level of this drill press is acceptable too. If orange is one of your favorite colors, you will also fall in love with the looks of this device. If you set realistic expectations, there’s no way this drill press will fail you.

Product Features:

Construction-wise, it looks rock-solid. It houses a powerful induction motor that has ball bearings in it for improved product performance and product longevity. As marketed by the company, you will be able to power this device through wood, plastic, steel, and other materials without any fuss.

It features a laser light too, which works almost like a night lamp, allowing you to work in brightness, even in low-light conditions. The variable speed adjustment is the icing on the cake. Yes, this drill can achieve different speeds, ranging from 580 to 3200 RPM.

The best part is that it hardly takes any effort to adjust the speed. You will also like the included swivel table, which is easy to move up or down. Better still, the table stays in its position each time it’s locked.

Advantages:

-Credit to the solid packaging, this drill press will arrive at your place with no damages or missing parts.
-This drill press is shipped in a partially assembled state. Frankly speaking, you will have to do very little to complete the full assembly.
-The WEN 4214 12-Inch Speed Drill Press comes with a speed (RPM) indicator, which is a nice little bonus feature on a product of this nature.

Disadvantages:

-Like other similar products in the market, this speed drill press runs a bit hot if it’s used extensively without

SKIL 3320-01 3.2 Amp 10-Inch Drill Press

This drill press is well-built, accurate, and powerful, all at the same time, which is to say that it will please most drill press purchasers out there. Seriously, you will be able to drill through different types of soft and tough woods, including high carbon metal, without any difficulty.

It’s also quite affordable, which is another solid reason to fall in love with this product over other best drill presses out there. Not to mention that the reviews for this drill press are encouraging enough to consider it in a blink of an eye.

Seriously, it has received enough positive reviews to grab a lot of eyeballs for all the right reasons. It’s, obviously, not the most powerful drill press machine out there. But then, it’s powerful enough for a weekend warrior’s needs.

Product Features:

The construction quality of this drill press is unquestionable. The table, base, and the main body are either made from steel or cast iron, which should tell you that this drill press is built to last long. Moreover, it doesn’t take much time or effort to learn how to operate this device.

The factory adjustments are spot on too. Right from the table, laser light, and belts, everything comes in proper alignment. You will also be pleased to know that this device stays relatively quiet during operation.

Given its sturdy built and powerful motor, it doesn’t rock like other similar drill press machines out there. The maintenance part is a walk in the park too. You can easily take this drill press apart to clean and grease everything.

Advantages:

-The integrated laser light is very helpful. It makes it easy to see in the dark. Of course, it also comes handy when you are working in tight spaces.
-The drill press assembly is very easy. The accompanying product manual carries helpful texts and images.
-The SKIL 3320-01 3.2 Amp 10-Inch Drill Press comes with a limited three-year product warranty, which is totally worth the paper it’s printed on.

Disadvantages:

-There’s an issue in the way it’s packaged. The company needs to pay more attention to product packaging.

DeWalt DWE1622K 2-Speed Magnetic Drill Press

If you need a powerful drill press, it can’t get any better than the DeWalt DWE1622K 2-Speed Magnetic Drill Press.

This thing will get the job done several times faster than other comparable units, without any degradation in performance, even after many years of use. It also has a clever safety mechanism to it, which prevents the motor from overheating. It’s about as loud as a device of this nature should sound.

So, you don’t have to worry about the noise level of this drill press. Plus, it’s not overly heavy. Without the case, it weighs around 35lbs, which is along the lines of other best drill presses out there.

Size-wise, it’s pretty compact too. Therefore, you will be able to use it easily in tight spaces as well. Furthermore, the device comes with a nice plastic case to keep all the included parts organized.

Product Features:

This drill press features a 10-amp motor. It also comes with two different speed settings, i.e., 300 or 450 RPM. Not to discount the fact that it can get to the top speed pretty quickly.

It’s truly capable of delivering professional results, which should explain why it costs more than other magnetic drill presses out there. It makes straight holes without any issues. It almost feels as if the device has no limits to it.

You are probably going to use it for every other project at hand. Another nice thing about this drill press is that it makes it remarkably easy to change the bit. Morever, this device won’t go down soon. It’s built to last for years to come.

Advantages:

-It’s quieter, it wobbles very little, and it’s a pleasure to use. Of course, it has plenty of power to get the intended job done sooner than expected.
-The assembly, use, and care instructions that come with the product are easy to read and understand.
-As hinted earlier, the DeWalt DWE1622K 2-Speed Magnetic Drill Press is good enough for heavy-duty use.
-This drill press has received high ratings and customer satisfaction reviews than other similarly priced products out there.

Disadvantages:

-For the electromagnetic base to work, the device needs to be plugged in. As you can tell, this isn’t a deal-breaking flaw.

Shop Fox W1667 1/2 HP 8-1/2-Inch Bench-Top Oscillating Drill Press

If you need a decent drill press at a decent price, feel free to pull the trigger on the Shop Fox W1667 1/2 HP 8-1/2-Inch Bench-Top Oscillating Drill Press. What sets this drill press apart from the crowd is its dual-mode operation. Yes, this device can conveniently serve two functions.

You can use it as a drill press or an oscillating sander, which is to say that you are getting two power tools at the cost of one. Other striking product features include a solid ½ horsepower motor and a ½-inch drill chuck.

This device also comes with a removable safety key to prevent accidental starts. Furthermore, the Shop Fox W1667 is fitted with a dust port, which does a wonderful job of keeping the work area clean. As you can tell by now, this drill press is well-made enough to give other leading brands a stiff competition.

Product Features:

The product comes with great documentation, allowing you to get this drill press use-ready quickly and easily, without roasting your brain in the process. Once assembled and put to use, you will realize that it has sufficient power for the materials it’s advertised for. It will also come to your notice that it’s not cheaply manufactured or assembled.

Of course, this product has more usable features than the competition. For user convenience, it comes with a depth-stop that will enable you to drill at a preset depth without any fuss. Another fine thing is that the included table tilts 90-degrees, allowing you to perform sanding operations at different angles. As marketed, it works totally fine for light and medium-duty activities.

Advantages:

-Unlike other best drill presses out there, Shop Fox W1667 Drill Press can be used for both drilling and sanding activities.
-Also, it’s easy to switch from a sander to a drill press and vice-versa. You will also love the compact built of this equipment.
-Product assembly doesn’t take more than fifteen to twenty minutes. The included instructions and diagrams are pretty helpful and easy to follow.
-Given the solid construction quality, this device will hold up well to years of drilling and sanding operations without any issues.

Disadvantages:

-The product packaging is sub-par. So, don’t be surprised if the item is delivered in a semi-busted box.
-The fact that this drill press is built for a home environment, you won’t be able to push it to its limits as you would normally do with a professional drill press.

WEN 4208 8 in. 5-Speed Drill Press

For budget drill press shoppers, the WEN 4208 8 in. 5-Speed Drill Press should be a no-brainer choice. Truthfully speaking, very few drill presses out there are as compact and affordable as this device.

So, it’s not just the least expensive product, but it’s also a space saver. Therefore, it can prove to be a fine bet for anyone who doesn’t have a lot of money or space for a drill press. Of course, the makers haven’t compromised a lot on the product specs to make this equipment both compact and affordable.

The 120V motor on this thing provides an RPM of anywhere between 740 to 3140. Yes, you can actually operate this device at five different speeds to tackle different jobs. It can even drill through steel. Everything considered, your overall happiness will be high because of the phenomenal value for money this drill press offers.

Product Features:

The WEN 4208 8 in. 5-Speed Drill Press has more cast iron on it than plastic. Of course, this makes this device a bit heavier than usual. However, the product ends up lasting long because of the solid-construction quality.

Another fine aspect is that this device doesn’t vibrate a lot like other low-priced drill presses out there. It’s also accurate enough, enabling you to use it for tasks that require attention to detail.

This thing can really accommodate the needs of a novice or intermediate woodworker without any problems. As long as you don’t test this drill press to its limits, you will never have any problems with it.

It will come really handy when the need arises. So, the reason to purchase this well-made drill press shouldn’t be limited to the low asking price. As described earlier, it can get a lot of jobs done around the house without any fuss.

Advantages:

-Given how well this equipment performs, even first-timers wouldn’t struggle to drill straight holes through tough materials.
-Changing the speed of the drill doesn’t involve a lot of learning curve. In other words, it doesn’t take a lot of time to get the good hang of this drill press.
-Considering the low price, it won’t be an understatement to claim that there is nothing seriously wrong about this drill press.

Disadvantages:

-The WEN 4208 8 in. 5-Speed Drill Press is not as durable as other best drill presses discussed so far.

Best Drill Presses: Buying Guide

In this section of the article, we have made a humble attempt to show you the ins and outs of the drill press shopping process. After all, most of us don’t really know what goes behind the scenes. So, let’s get started with this drill press buying guide to know what to look in a drill press.

Power

The motor power is an important consideration when shopping for the best drill presses. Usually, a drill press motor will be capable of producing an RPM of 3000, 4000, or more. Needless to say, a 5000 RPM motor will be more powerful than a 4000 RPM motor. Of course, a high-powered motor will cost more as well.

That said, not everyone needs a 5000 RPM motor. For light-duty projects, 3000 RPM motor will also work fine. But, don’t get a 3000 RPM motor if you intend to use the drill press for heavy-duty activities. In other words, avoid underpowered drill presses because they won’t be able to stand the test of time.

Speed

Assuming that you don’t have all the time in the world to make drill holes, you should invest in a drill press that can get the intended job done quickly, and of course, easily too. Generally, the speed of the drill press is adjusted by shifting the drive belt from one pulley to another.

The fast speed comes handy when drilling wood, and the slower speed is used for drilling metal. Obviously, high speed should not be at the cost of accuracy. The product should allow you to drill holes with utmost accuracy and precision.

Durability

A product of this nature goes through a lot of wear and tear. Therefore, it’s of paramount importance to get a durable drill press that will last long.

Frankly speaking, there’s no easy way to get a dependable product. You might have to read a ton of reviews of the shortlisted product to know whether or not the shortlisted drill press is reliable. Of course, make sure that the drill press carries a warranty too so that you can return it upon premature failure. Usually, well-known drill press brands don’t shy away from offering a solid warranty.

Safety

Finally, make sure that the shortlisted drill press is safe for use. After all, there is some element of risk involved when you are using a powerful drilling tool of this nature. The good news is that some of the well-made drill presses come equipped with handy safety features, which will protect not only your limbs but also the material in use.

That said, you shouldn’t worry about the safety issue if you are picking a drill press from the products recommended by us. Seriously, these best drill presses are as safe as they can get. So, you will remain injury free upon careful use.

Conclusion

If you don’t want to risk a bad deal, we suggest that you pick one of the best drill presses recommended by us. If you have already chosen a product, do share it with all the future buyers out there by posting a comment below.

Like this guide? Then you’d definitely love our other guides on the best welding helmets.

It’s not easy to get hold of the best welding helmets, especially when you are not a professional welder. If you don’t know any professional welder in person, it makes matters worse because you can’t even get solid recommendations.

Don’t worry; we will help you pick the best welding helmet without any trouble.

Spoiler Alert: To tell you the truth, the ESAB Sentinel A50 enjoys an upper edge over its competition. So, if you don’t want to read any further, you can get it in a flash.

A Spotlight On Some of The Best Welding Helmets 2020:

Miller 281000 Digital

Digital Controls: Yes

Weld Mode: Yes

Cut Mode: Yes

Grind Mode: Yes

X-Mode: Yes

Check Price

Honeywell Helmet

Digital Controls: No

Weld Mode: Yes

Cut Mode: Yes

Grind Mode: Yes

X-Mode: No

Check Price

Antra AH6-260-0000

Digital Controls: Yes

Weld Mode: Yes

Cut Mode: Yes

Grind Mode: Yes

X-Mode: Yes

Check Price

ESAB Sentinel A50

Digital Controls: Yes

Weld Mode: Yes

Cut Mode: Yes

Grind Mode: Yes

X-Mode: Yes

Check Price

SHKY Welding Helmet

Digital Controls: No

Weld Mode: Yes

Cut Mode: Yes

Grind Mode: Yes

X-Mode: No

Check Price

Miller 281000 Digital Elite Black Welding Helmet

If you are looking for a professional-grade welding helmet, look no further. The Miller 281000 Welding Helmet will meet your expectations beautifully. As advertised, it does a fantastic job of protecting your eyesight. It has straps for it to fit different head configurations.

So, you won’t have to keep adjusting it over and over again. Better still, it’s lightweight and compact enough for tight spaces. You will also be pleased to know that the replacement parts for this welding helmet are easily available in most welding supply stores out there.

The auto-darkening technology incorporated on the helmet is on point as well. It does a great job of improving a welder’s productivity by allowing him to see clearly, even when the welding helmet is in the down position.

Product Features:

You will be deeply impressed by the comfort level of this helmet. It holds on to your head comfortably, even when you are sweating like a pig. The viewing window on this helmet is also pretty big, which provides welders with optimal clarity.

Basically, it provides a better view of the welding area. Moreover, the construction of this welding helmet is pretty rigid for something as light as this product. The x mode is simply icing on the cake. Come rain or sun; it will automatically adjust the lighting to prevent you from misfiring.

As a result, sunlight or rain inference won’t hamper your productivity. As you can tell, this helmet addresses all the shortcomings that other similar helmets come with. If you have the purchasing power, you should get this welding helmet in a heartbeat.

Advantages:

-The Miller 281000 Digital Elite Black Welding Helmet is built better than other comparable models.
-Unlike other best welding helmets, the entire lens assembly on this helmet can be taken off for ease of cleaning.
-Even those who treated this helmet like crap have stated that it holds well to serious use.
-The fact that it doesn’t weigh as much as other similar helmets, it won’t cause you neck strain.

Disadvantages:

-It takes a little while to get used to this welding helmet because of the different settings and adjustment op

Honeywell Fiberglass Welding Helmet

The Honeywell Fiberglass Welding Helmet will work like magic from the moment you put it to use. Seriously, this headgear is better than expected in terms of construction as well as functionality. Of course, it’s not built like a brick wall.

But then, it’s good enough to be put to many years of serious use. The lens on this thing is also amazingly good for something that’s priced so low. It blocks all the interrupting light from behind. Better still, it provides maximum possible glare while welding. The helmet also stays comfortably on your head for long hours.

The best part is that it doesn’t start to feel heavy after a while, which you don’t often witness with other best welding helmets out there. Any old school welder will vouch for this welding helmet because of how good it is.

In fact, many of them have commented that this is one of the best headgears that they have come across in their welding career.

Product Features:

This welding helmet is so well-made from top to bottom that nothing on it needs improvement or replacement. The original factory paint is also superb. It won’t come off easily, even the helmet is subjected to a lot of abuse.

Yes, it can hold together for tens and thousands of hours of tough angle welding without any fuss. Another nice thing about this welding helmet is that it provides solid protection in odd positions as well.

Also, the strap on this helmet doesn’t require constant adjustment because of how well it fits most heads. If it’s been your dream to own this headgear, you shouldn’t be on the fence anymore. You will be completely satisfied with it on any given day of the week. In fact, this could easily end up being the main welding helmet in your shop.

Advantages:

-It does a wonderful job of keeping the sun out of your face, allowing you to work comfortably.
-The material of the Honeywell Fiberglass Welding Helmet is resistant to heat and moisture.
-As advertised, this welding helmet is light enough to be worn all day long without any issues.
-It’s hard to beat this headgear for the price it’s sold for. This helmet is truly a steal at its current price.

Disadvantages:

-The edges of the helmet are a bit rough. That said, this doesn’t affect its functionality.

Antra AH6-260-0000 Auto Darkening Welding Helmet

If you have decided to give this welding helmet a shot, let’s brief you with its features. To begin with, it comes with a bunch of settings that allow you to match this thing to the type of job you are doing. Of course, your eyes won’t get sore because of the use of this welding helmet.

The auto-darkening feature works fine as well. The visibility through the helmet is excellent too. And, the helmet stays in its place once it’s adjusted to the desired fitting. The batteries on this headgear are also easy to replace.

It comes with replacement lens, which may be a surprising bonus for most users out there. Seriously, this welding helmet is so good that you will find yourself using it a lot more often than other best welding helmets that you may already own.

Product Features:

It’s rated up to 13 shades for both IR and UV protection. This should tell you that this helmet will provide you with good protection against sparks, radiants, and whatnot. Not to mention that it has a dial on the side that allows you to conveniently change the scale of protection as per your desire.

Despite all these imposing features, this welding helmet doesn’t weigh a ton. It’s remarkably lightweight for something of its nature. At the same time, it’s quite affordable to be in the arsenal of budget shoppers as well.

It’s cheap in terms of price but not in terms of quality. The only downfall to this welding helmet is that it cannot be used for welding overhead objects. That said, this piece of information is clearly mentioned in the product manual.

Advantages:

-It features a sticker on the inside that tells you the part number for replacement lenses.
-Physically, it’s so well built that it won’t break even during the fifth or sixth year of use.
-With respect to the quality and features, this welding helmet is quite affordable.

Disadvantages:

-As hinted earlier, you won’t be able to use this headgear for welding overhead items.

ESAB Sentinel A50 Welding Helmet

The ESAB Sentinel A50 Welding Helmet is lightweight, sturdy, and easy to program. It offers the clearest view possible, which will definitely boost your welds. Of course, it’s far more inexpensive than getting an eye surgery done.

It looks cool as well. And, it doesn’t scratch easily. Not to mention that it holds up well to user abuse. Moreover, this thing fits comfortably. It won’t pull whatever hair is left on your head. You will truly enjoy welding with this helmet.

The quality is really out of the world. The auto-darkening feature on this item is pretty awesome too. If you are expecting a promising future in this field and you need a promising welding helmet, you shouldn’t skip this product. It’s the best investment you can do to keep your eyes protected. Seriously, it’s so good that you will also tell your neighbors to get one.

Product Features:

This helmet provides solid protection against literally all the outdoor elements that can interfere with your work, such as rain, sun, outdoor light, radiants, sparks, etc. So, this thing can be used both indoors and outdoors. Its low-profile design offers maximum head clearance, even while the helmet is in the upright position.

Basically, this thing will work great no matter what environment you are welding in. Its different levels of adjustment allow it to fit most heads comfortably without any issues. And, it doesn’t run hot like other helmets out there.

So, you won’t feel like your head is on fire, when used for a long time at a stretch. Moreover, this welding helmet is not flimsy, like all the newer models out there.

Advantages:

-It comes use-ready. You can just unpack it and put it to work almost right away.
-As advertised, the ESAB Sentinel A50 Welding Helmet offers nice visibility while welding.
-Unlike other best welding helmets, this one doesn’t put a lot of pressure on the head.
-To sweeten the deal, the makers include extra replacement lenses in each order.
-This welding helmet comes with a storage bag included in the deal, which is a nice little bonus.

Disadvantages:

-The price of the headgear is a bit high. But it’s totally worth the eye protection it offers.
-It’s not packed as proficiently as you might have expected for a product of this nature.

SHKY Welding Helmet

For infrequent welders on a budget, the SHKY Welding Helmet should be a no-brainer choice. It’s not the most amazing welding helmet that you can find around, but it’s definitely a keeper for its asking price. Basically, it’s affordable, easier to use, and sufficiently feature-rich.

To put it simply, this welding helmet offers a nice blend of price and quality. It comes with plenty of adjustment options on how it will fit the user and the type of welding it will be used for.

That said, it can be easily used even by a first-timer. The fact that the helmet allows you to see clearly before striking the arc, it can create a night and day difference in your welding abilities.

Product Features:

It features a sponge on the back, which you won’t find in other best welding helmets out there. The sponge really makes this headgear wearable for a long time without any difficulty.

Since this helmet will fully cover your head, you won’t need any other head gear to protect your head, such as cap, safety glasses, etc. It also comes with a tiny knob on the side, which makes it a breeze to adjust the visor’s position. And, this thing works straight right out of the box.

So, you won’t have to fool around a lot with the settings to make it work. It’s also very light compared to other cheaper welding helmets out there, which is definitely good news for all the neck pain sufferers out there.

Advantages:

-It’s a great helmet for anyone who doesn’t want to drop hundreds of dollars on a professional welding helmet.
-As marketed by the company, the SHKY Welding Helmet can easily fit a wide range of head sizes.
-The booklet that comes with the welding helmet includes all the necessary information of use.

Disadvantages:

-As hinted earlier, it’s not the best helmet for daily use in a commercial environment.

Best Welding Helmets: Buying Guide

While we believe that the reviews will help you pick the best product, we will step up to the plate and include a buying guide as well.

Viewing Size

This is one of the most important things to consider when shopping for the best welding helmet. As it’s easy to tell, the viewing size will determine how much you will be able to see through the helmet.

Today’s helmet comes with different viewing size, ranging from 6 to 9 square feet. Of course, you might come across a helmet with a wider viewing size too. There’s no standard rule over here on which viewing size is better for a welder. Ideally, you should consider your personal needs to determine what will work best for you.

Shade Level

Different welding helmets out there come with different shade levels. For those who don’t know, shade level refers to the amount of protection that a helmet can offer.

Generally speaking, you shouldn’t go for anything lower than 10 because it won’t do a good job of protecting your head. Depending on the type of welding job you do, choose a welding helmet that offers 10 or more shade protection.

Of course, the higher the shade level protection, the better it is. The chances are that you might have to stretch your budget for a helmet that comes with higher shade protection. But then, your eyes are totally worth the extra protection.

Auto Darkening

This new-age technology in most of the modern-day welding helmets is a game-changer in its own rights. The auto-darkening feature provides a clear view, even when light is emitted off the welding arc.

Basically, it allows a welder to perform his job at a desirable light setting while having constant face protection. It also reduces the neck pain associated with helmet nodding because the welder doesn’t have to constantly reposition himself to get a better view of the weld in progress. The idea is to choose a welding helmet that’s rated for the process at which you intend to weld.

Weight

A light helmet is the way to go over here. Obviously, a helmet that doesn’t weigh a lot will cause less neck strain. As a result, it won’t come in the way of your work, which is to say that you will be able to work for long hours without any discomfort.

Believe it or not, even one pound of extra weight on the head can make a lot of difference. So, be absolutely critical of the weight of the helmet. You don’t want to get a bulky helmet only to regret a few days later. The more you weld, the more thankful your neck will be for choosing a lightweight welding helmet.

Good brand

If welding is a part of your career, don’t choose any welding helmet out there. In fact, take the time to choose a helmet from a good brand. Products from reputable brands not only last long, but they also come with a standard warranty.

So, your investment on the helmet will stay protected if you stick with branded products. Of course, the customer support team will also be there to help you out during times of dire needs, which is another benefit of choosing a product from a good brand over a non-reputable brand, which won’t care much about its reputation.

Conclusion

If you are still on the fence and need further assistance on picking the best welding helmets, don’t hesitate to reach out to us. Just drop a comment below, and we will get back to you at the earliest.

Like this guide? Then you’d definitely love our other guides on the best rotary tool.

A good rotary tool can be used for a wide range of tasks, such as cutting, grinding, sanding, etc.

If you are in search of one, look no further. In this article, we have included the best rotary tools available in 2020.

Spoiler Alert: Currently, the best one, in our opinion, is the Dremel 4000-6/50-FF. While other products discussed over here are a close match, this product is a tad bit better.

Best Rotary Tool: Top Five Products of 2020:

Avid Power Rotary Tool

Max RPM: 25,000

Voltage: 120V

Power Source: Battery-Powered

Weight: 10.6 Pounds

Check Price

WEN 2305 Rotary Tool Kit

Max RPM: 30,000

Voltage: 120V

Power Source: Corded-Electric

Weight: 3.56 Pounds

Check Price

BLACK+DECKER Rotary Tool

Max RPM: 30,000

Voltage: 120V

Power Source: Corded-Electric

Weight: 1.04 Pounds

Check Price

Ginour Rotary Tool Kit

Max RPM: 35,000

Voltage: 120V

Power Source: Corded-Electric

Weight: 3.59 Pounds

Check Price

Dremel 4000-6/50-FF

Max RPM: 35,000

Voltage: 120V

Power Source: Corded-Electric

Weight: 1.30 Pounds

Check Price

Avid Power Cordless Rotary Tool

The Avid Power is one of the best designed rotary tools available these days.

For its small size, this thing is extremely powerful. It has a higher RPM than other similar tools built for the purpose of sanding, grinding, cutting, and so on. Not to mention that the RPM of this tool can be easily adjusted from 5,000 to 25,000, depending on the project at hand.

Seriously, this best rotary tool works like a masterpiece. Some past buyers have rightfully stated that it works well for everything you use it for. Also, this thing is not as noisy as other corded rotary tools out there.

The noise level of this device is totally bearable. Not to discount the fact that it won’t get hot during use. Therefore, you won’t have to take numerous breaks in the middle of the task to cool it down.

Product Features:

This is a cordless model. So, you won’t have to worry about long cords getting in your way, which will definitely improve your work efficiency. Plus, this thing features 4 LED lights on the front to illuminate dark areas, allowing you to work easily, even in dim light spaces.

Moreover, this power tool comes with 60 pieces of accessories to help you complete most home projects that are expected out of a power tool of this nature. At the maximum setting, it’s powerful enough to blast through loads of materials without any fuss.

Frankly speaking, this power tool is so good that the majority of the past shoppers have commented that they would love to do business with the company again, whenever the need presents itself.

Pros:

-For less money, you are getting a feature-rich rotary tool. Equivalent products come at a seemingly higher price tag.
-Since it’s a cordless tool, it has been used literally anywhere. You don’t have to be near a power outlet to use this rotary tool.
-Despite being a cordless rotary tool, it doesn’t lack power or speed. Believe it or not, it functions as good as a corded rotary tool.

Cons:

-The battery dies pretty quickly, especially with constant use. On the bright side, it also charges very fast.

WEN 2305 Rotary Tool Kit

If you are afraid to spend a lot on a rotary tool, you should take a shot at the WEN 2305 without any hesitation. Believe it or not, this best rotary tool comes at a shoestring budget. Seriously, the price is ridiculously low.

Yet, it can be used for a lot of personal use projects. So, why pay more for a big brand product? This thing is equally efficient, and it won’t take too many adjustments to run it. Moreover, it won’t overheat like other cheaper models out there, even if you put it to 2-3 hours of straight use.

It’s also much quieter during use. It does vibrate a bit. But then, the vibration is not excessive to piss you off. So, it shouldn’t be of major concern to you. Everything taken into account, there’s no better rotary tool than this one in its price range. Honestly speaking, it could even be your primary tool.

Product Features:

The WEN 2305 offers great work flexibility with its speed setting ranging from 8,000 to 30,000 RPM. At 3.5 pounds, it’s pretty lightweight too. Basically, this single tool can help you complete a lot of projects without any hiccups. You can use it to drill, cut, sand, grind, polish, and shape objects.

The flexible shaft attachment on this unit is perfect for jobs that require great precision and accuracy. Moreover, it comes with sufficient freebie bits to help you get started right out of the box. As long as your expectations are real, there’s no way you will be disappointed with this rotary tool.

For a weekend hobbyist, this rotary tool should be a no-brainer choice. Keep in mind that this tool also comes with an amazing storage case that will help you keep everything together.

Pros:

-This best rotary tool comes with a bunch of accessories, which should tell you how versatile it is.
-Given how well this rotary tool works, you are bound to be pleased with the results.
-The variable speed setting allows you to adjust the RPM based on the project’s needs.
-It’s available in both cordless and corded models to suit the varied needs of power tool shoppers.
-This rotary tool will pay for itself in no time by helping you do all sorts of projects around the house.

Cons:

-Construction-wise, the WEN2305 tool kit is not as solid as other expensive models in its category.
-It cannot be used for heavy-duty improvement tasks. But then, it’s good enough for most home projects.

BLACK+DECKER RTX-B 3 Speed Rotary Tool

The BLACK+DECKER RTX-B is ergonomical, adjustable, powerful, and superior to other similar power tools out there. Also, it’s fully compatible with other rotary tool accessories that you may already own.

Of course, the brand behind this best rotary tool doesn’t need any introduction. It’s the industry leader that has been around for long, which is to say that you won’t run into quality issues. The majority of the past purchasers seem deliriously happy with this rotary tool’s performance.

Almost everyone said that they made the right choice by trusting this product because it met their expectations beautifully, of course, without having them to drop a lot of money. It has helped them through many projects without any fuss.

Product Features:

As advertised by BLACK+DECKER, the torque on this rotary tool is simply outstanding. It comes with three speed options. Even at the lowest speed, it works quickly with a lot of power. And, it’s not as loud as you might think, despite the fact that it comes with a powerful motor.

So, this thing won’t be tough on your ears. In fact, the vibration is also minimal, allowing you to work with greater accuracy than usual. Not to mention that BLACK+DECKER doesn’t shy away from offering a bold warranty of two years on this rotary tool.

Anyone with common sense would know that this says a lot about the product’s craftsmanship. Also, this thing stores nicely in the accompanying carrying bag. As you can tell, BLACK+DECKER has nailed it with this rotary tool.

Pros:

-It operates smoothly, and it may feel much more comfortable in the hands than any other former rotary tool that you may have owned.
-This rotary tool won’t die quickly, even if it’s subjected to heavy abuse. Seriously, it’s very well-made.
-Given how handy this rotary tool is, you will wonder what made you wait so long to get this power tool. It’s seriously very good.

Cons:

-There’s some room for improvement in the user manual. It’s not picture-perfect like what you would expect from this brand.

Ginour Rotary Tool Kit

This is another affordable rotary tool that you can acquire by skipping a meal at a restaurant.

Seriously, this thing is too cheap for a robust power tool of its nature. For those who are not aware, it comes with 100+ accessories, and it’s plentiful powerful for most household projects. Also, the speed range on this thing is 8,000 to 35,000 RPM, which is in line with other expensive rotary tools out there.

Furthermore, the flexible shaft attachment makes this product extremely versatile. It accepts all Dremel bits and attachments without any difficulty. And, it takes no time to get used to this rotary tool because of how easy it is to operate it. Although not super quiet, this thing is not aggravatingly noisy.

You will also love the pistol-style grip on this rotary tool kit. It really stands out.

Product Features:

As described, the Ginour Rotary Tool Kit is a fantastic starter model product. Despite the low price, it’s made of good materials. And, this best rotary tool is really easy to use. Although a tad bit heavier, it’s not too difficult to handle. Basically, it won’t cause hand exhaustion like other bulkier units out there.

The best part is that it will work flawlessly without stalling in between. The delivery of this power tool is quick as well. Most past buyers have commented that it arrives well ahead of the estimated delivery date.

The Ginour also comes with a lifetime guarantee. How could you not recommend this wonderful product to someone looking for an affordable rotary tool?

Pros:

-The flexible driver on this tool makes it easy to reach tight places. Also, it plugs in, which means that there won’t be any battery issues.
-It comes with a case, which makes it easy to store the rotary tool along with the included accessories in one place.
-It’s a popular item with tens and hundreds of positive reviews. The product’s quality, pricing, and delivery; everything is hard to beat.

Cons:

-The Ginour is not a product for professional users. It’s meant for hobbyists.

Dremel 4000-6/50-FF High Performance Rotary Tool Kit

This is a premium rotary tool that comes with a promise of high performance. It houses a strong motor that can keep up with demanding work without any trouble. Credit to the variable speed, it’s also quite versatile.

You can set the speed from 5,000 to 35,000 RPM, depending on the project’s needs. Consistent customer feedback suggests that this tool allows for precision work like no other equivalent rotary tool out there. Keep in mind that it can be used with all the Dremel accessories.

It also has a light that illuminates dark spaces, allowing a person to work more efficiently in a dark environment. Better still, the innovated air flow mechanism on this thing prevents heat build-up for a quieter and cooler operation. As you can tell, this best rotary tool has a lot going for it.

Product Features:

The Dremel 4000-6/50-FF High Performance Rotary Tool Kit comes well-stocked with plenty of sanding discs, bits, and more. A box is included to house all the pieces together so that they don’t get lost. Design-wise, it’s almost perfect too.

It features separate control for on/off and speed adjustment. Also, the speed control is protected on purpose to prevent a user from accidentally changing the gear, which is very helpful, especially when a project requires you to work at the same speed setting.

It also feels better in the hands. Not to mention that this is a really tough tool. It will last for many years. So, you won’t be looking for another rotary tool anytime soon.

Pros:

-This rotary tool definitely matches the quality that you would expect from a well-known brand like Dremel.
-Other attachments that are bought separately will also work with this Dremel High Performance Rotary Tool Kit.
-As confirmed by a host of past buyers, this rotary tool never bogs down, which is, of course, good to know.

Cons:

-Given its high asking price, the Dremel 4000-6/50-FF may not be for everyone.

Best Rotary Tool: Buying Guide

Shopping for a perfectly capable rotary tool is easier said than done. So, let us show you the correct path right away so that you can find a suitable rotary tool without throwing an arm and a leg.

Motor Speed

You should inspect the motor speed of the shortlisted rotary tool to get a fair idea about its abilities.

The motor speed rating could be given as 10,000 RPM or even 30,000 RPM. The item with the higher rating is bound to deliver a better performance, which is to say that you should actively look for a rotary tool with higher RPM. Of course, the price of a product with a higher RPM will usually be higher than a product with a lower RPM.

Accessories

Usually, a rotary tool comes with a bunch of accessories, which will help you tackle different kinds of jobs. From cutting blades, drill bits, carrying cases, you can expect a lot of stuff.

If nothing’s included, then you might have to spend more to acquire them, which will, obviously, increase the cost of the rotary tool. So, it helps to check what accessories are included in the deal.

Corded vs. Cordless

Both are good and bad in their own ways. A corded unit will provide unlimited power supply. But then, it needs to stay plugged in, which means that you can only work with it around a power output. A cordless unit will stop working when the battery on it dies out.

However, the good news is that they can be used anywhere. You won’t have to use it near a power output. So, consider the pros and cons and choose a rotary tool based on what suits your individual needs.

Warranty

A product warranty is a necessary evil in a product of this nature because some of the rotary tools cost a significant amount of money. A solid warranty will protect your investment on the rotary tool.

The good news is that most of the reputed rotary tool brands offer a product warranty of 2-3 days, which will usually cover any damages caused due to manufacturer’s negligence. So, check the warranty terms before finalizing a deal. You will surely thank yourself for this.

More Shopping Tips

-Check if the grip of the shortlisted rotary tool is comfortable or not. After all, it’s not easy to work for long hours with a tool that is uncomfortable to hold. It may hamper your work efficiency.

-For added convenience, get a rotary tool that features an LED light. Of course, this is not a mandatory feature. But then, it helps to get such a unit if you are anticipating to use it in dark places.

-Get a quiet unit too. Believe it or not, some of the rotary tools have a horrible noise volume. The noise level is worse than a noisier fan. Check what past purchasers have to say about the volume of the product, and go from there.

-Finally, inspect whether or not the rotary tool is compatible with all Dremel attachments and accessories. The ones that are compatible can handle all types of jobs thrown their way. Of course, this will also eliminate the need to purchase different accessories.

Conclusion

Finally, it’s time to say goodbye. Do let us know what you think about these best rotary tools by posting a comment below.

Like this guide? Then you’d definitely love our other guides on the best cordless screwdriver.

If you are finding it hard to trim overhead tree branches with your regular chainsaw, you owe it to yourself to get one of these best pole saws listed below.

For those who don’t know, we have carefully chosen these products over other innumerable choices out there. So, you can’t go wrong with any of them.

Spoiler Alert: The vote for the best overall pole saw goes to the Remington 41AZ32PG983 Electric Pole Saw. It’s truly a rising product in its category.

Best Pole Saw 2020: Top 5 Saws Discussed

Greenworks 8.5′ Pole Saw 20672

Pole Length: 8-Feet

Cuts per Charge: Up to 65 Cuts

Weight: 8.36 Pounds

Dimensions: 107 x 7 x 7.5 Inches

Check Price

Remington 41AZ32PG983 Pole Saw

Pole Length: 10-Feet

Cuts per Charge: Up to 70 Cuts

Weight: 12.4 Pounds

Dimensions: 9.5 x 9 x 66.8 Inches

Check Price

Poulan Pro PR28PS 28cc Pole Saw

Pole Length: 8-Feet

Cuts per Charge: Up to 65 Cuts

Weight: 14.0 Pounds

Dimensions: 39.8 x 10.2 x 10 Inches

Check Price

Sun Joe SWJ802E Pole Chain Saw

Pole Length: 9-Feet

Cuts per Charge: Up to 60 Cuts

Weight: 7.90 Pounds

Dimensions: 112.7 x 5.5 x 112.7 Inches

Check Price

BLACK+DECKER 20V MAX Pole Saw

Pole Length: 10-Feet

Cuts per Charge: Up to 60 Cuts

Weight: 9.08 Pounds

Dimensions: 8.2 x 8.1 x 44.5 Inches

Check Price

1. Greenworks 8.5′ Pole Saw 20672

The Greenworks 8.5′ 20672 will satisfactorily solve the problem of overgrown branches in need of a proper pruning. This battery-powered pole saw is as powerful as a gas-powered unit, but far quieter and more convenient to use.

The best part is that it doesn’t stall in tough spots like other competing pole saws out there. Yes, the brushless motor on this thing is deceptively strong to help you complete most projects without any fuss.

It truly does a fantastic job of edging. Not to mention that it’s quite energy-efficient too. This means a single battery can last you for many projects. Furthermore, it doesn’t turn hot, even when you use the pole saw for a long time at a stretch.

Product Highlights:

The Greenworks 8.5′ 20672 fits nicely in most hands, and it doesn’t weigh a lot. For both these reasons, you will find it easier than usual to control this pole saw. It lets you cuts accurately without any issues. Not to discount the fact that this equipment comes with many attachments to provide multiple functions.

Basically, this pole saw enables you to get the most out of a product of this nature. Maintaining this best pole saw is easy as well because of the automatic oiler that keeps the chain lubricated without too much of a human intervention.

Also, the Greenworks 8.5′ 20672 is constructed well enough to offer several years of service and more.

The Good Things:

-The fact that it’s a cordless pole saw, you won’t have to deal with the fussy cords.
-Unlike the competition, this pole saw doesn’t struggle with thick branches/grass. Basically, it does a perfect job every time.
-It comes with a wall hanging hook, enabling you to conveniently store the pole saw when not in use.
-To best protect your investment, the makers offer a two-year warranty on this pole saw.

The Bad Things:

-The blade adjustment might take a few tries to get it just right for use. But then, it’s not a big deal.

2. Remington 41AZ32PG983 Electric Pole Saw

This is a 2-in-1 tool that can be used both as a chainsaw and a pole saw, which is one of the biggest merits of owning this tool. This thing also has an adjustable handle to it, allowing you to extend the saw up to 10 feet.

With the operator’s height included, this pole saw can provide a long reach of 15 feet without any difficulty. It’s fairly powerful as well for something of its size. Credit for the power goes to the 8-amp motor that’s housed in this pole saw. It can easily cut through thick and difficult materials without getting clogged.

Above all, the Remington 41AZ32PG983 is much quieter than a gas-powered saw. Not to undermine the fact that the pole saw is easy to assemble and use.

Product Highlights:

Made from a combination of aluminium and fiberglass, this saw is very well-made. Upon proper care, it can last really long. Both the trigger and cord mechanism are very well-thought, allowing you to use the tool effortlessly for a long time without any difficulty.

Keep in mind that it can be held upside down or in any other desirable position you feel safe for knocking a lot of trash grass and trees. Basically, it makes the task of tree/grass trimming a lot easier than usual because the motor on this thing is as fast and powerful as a gas version of this device. Seriously, you will regret not getting this 2-in-1 cutting device sooner.

The Good Things:

-The Remington 41AZ32PG983 offers plenty of speed and power for light work around the house.
-Compared to a gas saw, this best pole saw makes the trimming job a lot easier and safer.
-The price is reasonable too. Even if the unit dies after a few uses, it will pay for itself.
-Since the saw is electric, you won’t have to bring gas with you to use this thing outdoors.

The Bad Things:

-Once fully extended, the saw does feel slightly heavy. That said, it isn’t overly bulky or heavy.
-You will have to purchase the chain oil too in order to lubricate the machine before use.

3. Poulan Pro PR28PS, 28cc Pole Saw

The Poulan Pro PR28PS is a gas-powered saw that offers great power output, enabling it to cut through thick branches and vegetables without any difficulty. Seriously, it’s one of the most powerful pole saws in the discussion.

Ergonomically, this pole saw is perfect as well, allowing one to make precise cuts with relative ease. The best part is that it comes with various attachments that makes this tool highly versatile.

From regular trimming to edging, tilling, pruning, blowing, and more, it can be used for a variety of different tasks. Not to mention that there’s very little assembly needed to get started with this equipment. Therefore, one shouldn’t think twice before getting this marvel of a pole saw.

Product Highlights:

The brand behind this pole saw is one of the best ones out there in the chain saw industry. Poulan has been around for more than a decade. So, the credibility definitely exists. No joke, this best pole saw has been well-received by the customers.

According to most product purchasers, this pole saw works flawlessly without stalling in the middle of the task. Also, it doesn’t run hot, even when subjected to a lot of work at a stretch, which should tell you how well-made this pole saw is. Moreover, it cuts fast even when it’s not new.

Seriously, you will be able to clear acres and acres of overgrown trees with this equipment without any trouble.

The Good Things:

-Sound-wise, it’s no louder than other gas pole saws that you find around.
-As hinted earlier, the pole saw assembles quickly out of the box, allowing you to get started almost right away.
-Unlike other similar pole saws, this one cuts clean without requiring too much effort from the operator’s part.
-The quality of the pole cannot be questioned. It does flex, but it won’t bend or twist.
-This pole saw is truly undervalued. Seriously, Poulan can easily get away with a price-hike.

The Bad Things:

-Given the high-power, it’s a bit heavy. So, you would need some arm strength for time-consuming projects.

4. Sun Joe SWJ802E Electric Pole Chain Saw

This is one of the top selling pole saws in the market today. While being inexpensive, this little beast is well-designed, powerful, and simple to operate, all at the same time. Also, the head of the pole is quite flexible, allowing an operator to adjust it at different angles for a precise cut.

It can really handle troublesome branches like a champ. Keep in mind that it offers a nice cutting height too. It can extend up to 10 feet, offering users a total height of around 15 feet. Given the generous reach, you won’t need a ladder to trim high branches. Subsequently, you might also save yourself a trip to the hospital, and a resulting medical bill that could run into thousands of dollars.

Product Highlights:

Even though it’s not a full-size pole saw, it’s equally effective. Seriously, you won’t believe how powerful this bad boy is.

It can cut right through everything and anything that it’s needed to cut. Due to the nice ergonomics, this pole chain saw is also easy to manage, even at full extension. It rarely tosses chips at your face. Moreover, the saw doesn’t show any signs of dullness even after months and months of use.

Given how good this pole saw is, you might become a pro at cutting without any prior experience. Not to mention that this pole saw will pay for itself in probably three to four uses. Frankly speaking, it’s so amazing that you might volunteer to trim your neighbors yard.

The Good Things:

-The key parts are nicely labelled, making it very easy to use this best pole saw.
-This thing comes almost 95% assembled. So, there’s very little work needed to use this saw out of the box.
-It’s surprisingly easy to handle, even when the pole is fully extended.
-Even those who don’t often review products have written about this pole saw stating that it deserved a positive review.
-The Sun Joe SWJ802E Pole Saw comes with a full two-year warranty, offering customers with great buying comfort.

The Bad Things:

-The oil reservoir on this thing is pretty small. It fills up quickly, creating a mess in the process.

5. BLACK+DECKER 20V MAX Pole Saw

The BLACK+DECKER 20V MAX Pole Saw accomplishes its intended purpose like a true workhorse. It cuts tree limbs without you having to climb a tree or using a ladder. As advertised, it’s expandable, light, and easy to handle, allowing you to cut high tree branches without out fuss.

Better still, it functions flawlessly even on a low battery. Basically, this saw provides constant torque from start to finish. Another interesting aspect of this best pole saw is that it breaks down into three pieces for easy storage. Not to undermine the fact that this equipment has received tens and hundreds of reviews stating how good of a pole saw it is, especially for its price point.

Product Highlights:

It’s a breeze to put together and take apart this saw. The included instructions couldn’t have been any better. Both the language and the diagrams are spot on. Even a first-timer will be able to use this pole saw without any difficulty.

Since it’s lightweight, it’s also easy on the operator’s back. Believe it or not, boatloads of first-timers have attributed their first few projects to this saw and not their skills. This should tell you how thoughtfully this pole saw is designed.

Unlike equivalent saws, the makers of this pole saw also offer a two-year warranty to put customers mind at ease. Therefore, the decision to get this pole saw won’t backfire in a big way.

The Good Things:

-Since it’s a cordless pole saw, you will find it easy to manoeuvre without having to drag a cord around.
-The BLACK+DECKER 20V MAX Pole Saw features a high capacity 20V battery. Seriously, the battery is plentifully adequate.
-Given how useful and dependable this pole saw is, you won’t have to pay anyone hundreds of dollars to trim trees in your backyard.
-The saw comes with a handy storage bag that can easily fit the saw along with other accessories.

The Bad Things:

-Oiling this thing can be a bit of a pain. It’s a little difficult to reach some internal parts.

Best Pole Saw: Buying Guide

Shopping for a pole saw isn’t the same as shopping for a regular chainsaw. Usually, a lot of people struggle to separate the best pole saws from all the junk out there, causing them a lot of shopping grief. So, we are going to focus on some key factors that one needs to consider when shopping for the best pole saw in the market.

Gas vs. Electric

As most of you guys might already know, there are both gas and electric pole saws out there. Generally speaking, the gas pole saws are more powerful than the electric ones. However, one has to go through the hassle of refuelling the gas.

So, the better option is to opt for a battery operated cordless electric model. Most of the modern-day electric pole saws are adequately powerful for most home projects. Not to mention that they are a lot easier to clean as well. Ideally, you should choose a gas-powered unit only if you have to deal with very thick and stubborn branches.

Pole Saw’s Reach

It goes without saying, you need to choose a pole saw that has adequate reach to prune the branches you are targeting. Usually, the length of the pole saw will be clearly mentioned in the product description.

Of course, potential buyers should take into account their own height as well to gauge the exact reach of the pole saw. Ideally speaking, you should be able to trim the targeted branches without having to overstretch yourself.

Obviously, you shouldn’t lose your balance too. If you haven’t noticed it yet, most of the pole saws reviewed by us offer a generous reach of 15 feet, allowing you to trim high branches without any issues.

Cutting Diameter

As a future pole saw purchaser, you should also pay heed to the cutting power of the shortlisted saw. Most of the pole saws out there can cut branches between 3 to 8 inches in diameter. If you were to get an underpowered unit, it won’t be able to cut thick vegetations or branches.

As a result, your investment on the pole saw will go down the drain. Also, keep your yard size in mind when shopping for the best pole saw. Larger yards will usually require a powerful pole saw.

Other Important Things to Consider:

-When dealing with taller trees, it’s better to choose a cordless unit over a corded one.

-One should pay attention to the battery life as well. You should check how long each recharge last.

-If you are getting a gas-powered saw, check if it’s eating a lot of gas or not.

-If you plan to use a pole saw regularly, you would be better off with a gas-powered saw as opposed to an electric saw.

-Consider your budget as well. Keep in mind that the gas units cost more than the electric ones.

-The cordless pole saws cannot be used in wet conditions. So, you will have to keep the environmental factors in mind as well.

-If you don’t have too much arm strength, get a lightweight pole saw so that it’s easier for you to handle it for long.

-Your skill level would matter too. First-timers should consider an electric saw because it’s light, quiet, and easy to use.

-Professionals should go for a gas-powered unit because it can get more work done in less time.

-Finally, do check reviews of the shortlisted saw to get a fair idea about the product’s capability and real-life performance.

Conclusion:

If you need further help on choosing on the best pole saw, don’t hesitate to bring it to our notice. We welcome you to use the comment section below to voice your opinion.

Like this guide? Then you’d definitely love our other guides on the best cordless screwdriver.

No house should be without a cordless screwdriver these days. The fact that you are here tells us that you need one too. Fortunately, there are plentiful choices out there.

However, it’s not easy to separate the winners from the sheer losers, especially when you are a first-time screwdriver shopper. So, let’s introduce you to the best cordless screwdrivers that the market has to offer.

If you are in a hurry, you can cut the chase by ordering the most favorite cordless screwdriver, which is the Milwaukee 2401-20 M12 Lithium-Ion Cordless 1/4 Screwdriver. This cordless screwdriver is totally unbeatable at its price point.

Best Cordless Screwdrivers 2020: Top 5 Products

SKIL Rechargeable Screwdriver

Voltage: 4V

Torque: 36 In/Lb

Weight: 0.85 Pounds

Dimensions: 5 x 5 x 2 Inches

Check Price

Milwaukee 2401-20 Screwdriver

Voltage: 12V

Torque: 500 In/Lb

Weight: 1.63 Pounds

Dimensions: 8 x 8 x 3 Inches

Check Price

DEWALT 8V MAX Cordless Screwdriver Kit

Voltage: 8V

Torque: 500 In/Lb

Weight: 1.10 Pounds

Dimensions: 12 x 3 x 9 Inches

Check Price

Pink Power Cordless Screwdriver

Voltage: 4V

Torque: 36 In/Lb

Weight: 1.00 Pounds

Dimensions: 6 x 6 x 4 Inches

Check Price

BLACK+DECKER Cordless Screwdriver

Voltage: 6V

Torque: 36 In/Lb

Weight: 1.00 Pounds

Dimensions: 6 x 1 x 8 Inches

Check Price

1. SKIL Rechargeable 4V Cordless Screwdriver

If you are a fan of hand-sized screwdrivers, you shouldn’t hesitate to pull the trigger on the SKIL Rechargeable 4V Cordless Screwdriver. It performs well enough for most household jobs, and it’s easy to use as well.

Seriously, you will fall in love with the overall execution of this super handy device. The best part is that it will hold the charge long enough to help you complete most jobs that you would use it for. Not to mention that the power of this unit is sufficient to screw almost anything.

Therefore, you won’t be in a situation where you wished that it would be great if the screwdriver did this or that. Unlike the competition, it also fits really well in most hands, enabling a person to work more efficiently than usual.

Product Highlights:

The construction of this best cordless screwdriver is definitely solid. Even when it’s dropped on the floor, it will survive the fall. Of course, if you don’t take the liberty of abusing this screwdriver, it will definitely last long. Another nice aspect of this cordless screwdriver is that it can be locked in a neutral position, which means that it won’t accidentally run when it’s your tool bag.

Also, this thing can be recharged via a USB cable, which means that you can afford to lose the charger. The charge time is remarkably fast as well. Furthermore, most past purchasers have commented that they loved the looks of this little guy. Not to discount the fact that it’s priced right too.

Pros:

-The SKIL Rechargeable Screwdriver is quite powerful for its small size. Yes, this thing has a deceptive amount of strength to it.
-The LED light is a nice bonus feature that allows an operator to work with this tool, even in dim light conditions.
-This screwdriver can be used in narrower areas too because of its compact built.
-Given the decent battery life, you won’t find yourself recharging it frequently.

Cons:

-Even though it’s a good unit, don’t expect heavy-duty work out of it on a daily basis. It’s actually designed for light applications.

2. Milwaukee 2401-20 M12 Lithium-Ion Cordless 1/4 Screwdriver

The Milwaukee 2401-20 M12 Lithium-Ion Cordless 1/4 Screwdriver can do a better job than its competition but with far less mass and resulting fatigue. Yes, this best cordless screwdriver is powerful enough to do far more jobs than simply hanging a picture on the wall.

So, don’t let the compact built of this unit fool you. This thing will easily stand up to highly demanding jobs, which should tell you that this cordless device is out there for serious business. It comes with a nice trigger too.

The folks at Milwaukee have really nailed it with this screwdriver. This screwdriver oozes quality in all areas of use. Therefore, don’t wrestle with your mind whether or not you should get this unit.

Product Highlights:

Milwaukee makes awesome power tools. And, this cordless screwdriver is just one prime example of it. Seriously, this little gem is almost stormproof. It can go strong for a decade and even more, of course, when properly cared for.

The best part is that it appears and feels like new, even after many months of use. The battery life of this screwdriver is insanely good as well. The tool also features a battery level indicator that tells you how much battery life is left.

Clearly, this cordless unit is a better-made version of its peers. The inventors of this product didn’t miss a beat with the utility or the design aspect of this cordless screwdriver.

Pros:

-It’s smaller, lighter, and powerful than other similar tools out there. Of course, it operates smoothly as well.
-The device makes it easy to control the speed, which may be required for precision work.
-Given how well-made this screwdriver is, it will save your wrist from a lot of trouble.
-This cordless screwdriver is far better than the ones you find in big box stores these days.

Cons:

-The motor on this thing makes a humming noise when you press the trigger to fire the device.
-It’s more expensive than other available screwdrivers discussed over there. That said, it’s not frighteningly expensive.

3. DEWALT 8V MAX Cordless Screwdriver Kit

As expected from DEWALT, they have made a high-quality screwdriver with a good weight, feel, balance, and power to it. Believe it or not, this thing can go up to 430 RPM from ground zero at a moment’s notice. The chances are that all your friends at work will marvel at the sight of this tool’s performance.

This device also has a handy size and weight to it, making it easy to use in tight spaces without any issues. You will also appreciate the LED light on this unit that lights up the work area very well.

Moreover, the battery of the DEWALT 8V MAX Cordless Screwdriver charges pretty rapidly. As the result, you won’t have to deal with a lot of downtimes in between work. Not to mention that it’s remarkably easy to get the hang of the gyroscopic feature of this device. Seriously, operating this device will feel like second nature to you after a few uses itself.

Product Highlights:

The DEWALT 8V MAX Cordless Screwdriver Kit easily switches between a screwdriver and pistol mode. Better still, this unit feels good in the hands, both in straight or pistol grip. Also, this thing comes with multiple torque settings that are a breeze to change.

The build quality of the screwdriver is phenomenal as well. Furthermore, the torque on this thing is good enough for completing any job that’s expected out of a product of this nature. Moreover, the screwdriver comes with a nice nylon bag, which is perfect for storing this device.

Seriously, it’s only once in a while that you run into such as wonderful power tool. Of course, you won’t be able to build a house with it. But then, it’s good enough for most repair and assembly work around the house.

Pros:

-This cordless unit operates pretty quietly. In fact, you won’t even need hearing protection.
-The batteries last long with normal use. As a result, you wouldn’t feel the need to haul the charger around.
-Unlike the competition, the LED light on this device is plentifully bright. It lights up whenever the driver is activated.
-For greater power control, the tool comes equipped with a variable speed control option.
-It’s compact enough to be easily carried around in a tool pouch, pretty much all day long.

Cons:

-The fact that you get a full kit, the price is obviously going to be higher than usual.

4. Pink Power PP481 Cordless Electric Screwdriver

As the title of this cordless screwdriver hints, this power tool is geared towards women. Hence, it has a pink color scheme to it. And, it’s lighter than other similar electric screwdrivers available nowadays. Plus, it fits in smaller hands too. Of course, men who don’t mind using a pink power tool can also consider this screwdriver because of how well-made it is.

Most men contractors who have bought this screwdriver have appreciated it for its lightweight and ease of use. They have also commented that it’s powerful enough to do a wide array of jobs around the house, which is actually true. Of course, it comes with a charging cord too.

Product Highlights:

As advertised, the Pink Power PP481 Cordless Electric Screwdriver is a no-nonsense power tool. It has the right size, weight, grip, and power to it be a great addition to any toolkit out there. As hinted earlier, it works just as good as cordless screwdrivers designed for men, if not better.

Although it comes in 14 pieces, the screwdriver is easy to assemble. It’s also pretty quiet, which should tell you that you can also do late night projects with it without waking up other family members. The fact that it comes in a pink color, it can prove to be a great gift for your wife or girlfriend.

Pros:

-The screwdriver has a pivoting handle, which makes it easy to use this Pink Power tool even in tight spaces.
-Because of how light it is, the screwdriver can also be considered by old folks who don’t have too much arm power.
-The screwdriver has a spotlight on it. Moreover, it looks too nice for a power tool.
-Although designed for women, men who are not intimidated by the pink color can also consider this best cordless screwdriver.

Cons:

-Not everyone out there will like the pink color scheme of this cordless unit.

5. BLACK+DECKER Cordless Screwdriver

The BLACK+DECKER Cordless Screwdriver is a good power tool for everyday use. The engine on it is powerful enough to drive a lot of screws at a stretch without bogging down in between. Of course, it’s not meant for heavy-duty projects. But then, it’s perfect for light and medium-duty tasks.

It’s priced accordingly, too. Therefore, you won’t feel the need to drop a lot of money to acquire this cordless screwdriver. Believe it or not, this screwdriver will cost you less than a meal at a burger joint. So, if you are in the market for an inexpensive cordless screwdriver from a good brand, you should get this tool in a heartbeat because you would be hard-pressed to find anything better in the same price range.

Product Highlights:

Even though this screwdriver doesn’t cost an arm and a leg, the ergonomics are spot on. It feels really good in the hands, and the handles can be moved in three different positions to help you work better than usual. You can also trust this screwdriver to last long because of how well-built it is.

It has a remarkably good battery life too, enabling you to use the tool for more than one use. Seriously, the charge lasts so long that occasional users might even forget where to put the recharging cord that plugs into the battery.

The operation part is not intimidating at all. On the contrary, it’s a walk in the park to operate this screwdriver, especially when you understand the reverse/button operation.

Pros:

-Unlike other similar tools out there, it’s not hard to reach the on/off switch.
-Since it’s a cordless screwdriver, you won’t have to worry about cords getting in your way of work.
-The price of this power tool is reasonable enough for most homes to own it.

Cons:

-Before first time use, you need to charge the rechargeable batteries for at least sixteen hours.
-This screwdriver doesn’t have a charge indicator on it. Of course, this isn’t a serious product flaw.

Cordless Screwdriver: FAQ

Why Should you Choose a Cordless Screwdriver?

A cordless screwdriver can be used without a power source, and it’s easier to handle in comparison to a corded unit. This means that you will need less skill and effort to control a power tool of this nature.

The battery power on such units is usually sufficient to complete most projects around the house. They are also easier to work in tight spaces. Furthermore, they are safer to use as well, because you are not at risk of an electric shock. Not to mention that they are typically less expensive, which means that you can get them without spending a heck lot of money.

What’s the best application for cordless screwdrivers?

As mentioned earlier, they are ideal for small jobs around the house, such as removing a cabinet door/window, hanging a wall picture, putting together a furniture, craft projects, product assembly, fixing electronics, and other minor repair work that usually require you to screw in and remove screws.

As can you tell, they are versatile enough for a wide variety of tasks.

Best Cordless Screwdriver: Buying Guide

A little knowledge and research can go a long way in helping one choose the best screwdriver from the infinite choices out there. So, let’s tell you the features that you need to look for when shopping for the best cordless screwdriver in the market.

Check the Power

With screwdrivers, power is measured in terms of voltage. So, check the product description of the shortlisted screwdrivers to know how much power they carry. Of course, the cordless screwdrivers with higher voltage will perform better than the units with lower voltage.

As a general rule, don’t consider getting a cordless device with less than 3.5V because anything less than 3.5 voltage is bound to deliver lackluster performance, no matter how much you pay for it.

Check the Battery Life

If you are using a cordless screwdriver mainly at home, then the battery life won’t matter much because you will have the convenience of charging it without any trouble. However, you may not have the same convenience when you are working with the tool miles away from your home.

Therefore, it’s better to choose a screwdriver with a long-lasting battery life. Alternatively, you can purchase an extra battery. Of course, this will add to the cost of the product.

Check the Grip

It goes without saying, the grip of the shortlisted cordless screwdriver must be comfortable to hold so that you can work with the tool for an extended period of time without any difficulty.

Generally speaking, a soft grip is the way to go over here since it will reduce hand strain and the resulting fatigue to a great extent. So, choose a unit with a high-quality, rubberized grip as opposed to any other generic grip. A soft rubberized grip will enable you to work longer without any discomfort.

Check the Weight

Obviously, you would want to own a cordless screwdriver that doesn’t weigh as much as a baby elephant so that you can easily carry it around your back pockets. After all, getting a bulky unit defeats the purpose of going cordless.

Therefore, check the weight of the screwdriver before you reach out to your wallet to draw your credit card. Portability aside, lighter units are also easier with work with as they are bound to cause less arm fatigue. Not to mention that they can also be used by older folks in the house who have less arm strength.

Conclusion:

Hopefully, the idea of shopping for the best cordless screwdriver isn’t as daunting as before. If you think that we have directed you to the right product, do share your product of choice by posting a comment below.

Like this guide? Then you’d definitely love our other guides on the best reciprocating saw.

While reciprocating saws may not be for everyone out there, they can still be a very handy tool to keep around the house. Not to mention that maybe a necessary tool for regular woodworkers or power tool enthusiasts out there.

So, let’s take a look at the best reciprocating saws that the market has to offer nowadays.

Spoiler Alert: The vote for the overall favorite product goes to the DeWalt DWE305 Reciprocating Saw. As you might already know, DeWalt power tools are unlike anything else out there.

Best Reciprocating Saws Discussed:

Makita JR3050T Reciprocating Saw

Voltage: 240V

RPM: 2800

Weight: 10 Pounds

Dimensions: 18 x 4 x 7 Inches

Check Price

Ryobi P515 One+ Reciprocating Saw

Voltage: 18.0V

RPM: 3100

Weight: 4.6 Pounds

Dimensions: 15 x 6 x 6 Inches

Check Price

Black+Decker BDCR20C MAX Reciprocating Saw

Voltage: 20.0V

RPM: 3000

Weight: 4.5 Pounds

Dimensions: 15 x 3 x 7 Inches

Check Price

DeWalt DWE305 Reciprocating Saw

Voltage: 120V

RPM: 2900

Weight: 8.1 Pounds

Dimensions: 19 x 9 x 4 Inches

Check Price

Milwaukee 6509-31 Reciprocating Saw Kit

Voltage: 120V

RPM: 3000

Weight: 3.3 Pounds

Dimensions: 22 x 11 x 5 Inches

Check Price

1. Makita JR3050T Reciprocating Saw

The Makita JR3050T Reciprocating Saw is not a top-of-the-line reciprocating saw, but it’s highly dependable and inexpensive, both at the same time. Although this demolition tool houses an 11-amp motor, you will feel as if it has as much as 13-amp motor in it.

Seriously, you won’t find much power difference between this and other high-powered reciprocating saws out there. The Makita JR3050T saw can cut through thick and tough objects as you would have hoped for.

Basically, this saw is plentifully powerful to handle a lot of cutting tasks around the house. You will hardly see it struggle. The saw is also very easy to handle. It makes effortful tasks a lot easier than usual. Not to mention that the Makita saw carries a one-year limited warranty.

Product Features:

The blade replacement mechanism on this saw deserves our admiration. Seriously, there’s no way to suck at it because you just have to move the collar lock to the unlock position, and the existing blade will pop out free, allowing you to quickly swap it for a new one.

This robust product is also built to last. If you are not using it commercially, the saw will last you for the rest of your lifetime. The tool is truly built for serious business. Not to discount the fact that you will feel reasonably safe working with it.

Believe it or not, this saw has received the same rankings as other high-priced saws available nowadays. Bearing the cost in mind, you will never regret getting this Makita saw. Seriously, you should have picked up this tool years ago.

Advantages:

-This awe-inspiring tool can cut through just about anything you want, provided you pick up some sharp blades for it.
-The Makita JR3050T Reciprocating Saw is not overly heavy like other similar power tools of its nature.
-The lightweight and lack of unnecessary vibration reduce hand fatigue, which is, of course, wonderful to know.
-Given its compact size, this best reciprocating saw can be easily used in tight spots as well.
-It comes with a nice case for storage. Consequently, the saw won’t get destroyed due to it being stored with other tools.

Disadvantages:

-The trigger lock needs to be placed at a better location. At its current location, it can get activated by accident.

2. Ryobi P515 One+ Reciprocating Saw

The Ryobi P515 One+ Reciprocating Saw is one of the least expensive reciprocating saws available nowadays. Well, this doesn’t mean that the saw will operate at a snail’s pace. Even though it’s inexpensive, you can have high hopes from it.

For instance, it can deliver a maximum power output of 3,100 SPM, which puts this saw in line with other best reciprocating saws in the market.

Also, this thing has an anti-vibration handle to it that allows a woodworker to cut more comfortably and accurately than usual. Not to mention that this saw works wonderfully right out of the box. Of course, you will also enjoy the convenience of it being a cordless device.

Product Features:

The Ryobi P515 One+ Reciprocating Saw is light enough for easy handling, and powerful enough to handle tough jobs. Better yet, this thing won’t eat batteries as quickly as other battery-operated units, allowing you to take care of a lot of cutting chore at once. Keep in mind that the speed of this unit can also be adjusted to suit the cutting task at hand. The vibration is minimum as well, enabling you to cut with higher precision than usual. When paired with the right blade, it will be able to cut anything on its sight. If handled well, this thing can also last long. So, don’t expect the saw to give up on you very soon just because it didn’t cost you top-dollars.

Advantages:

-It comes nicely packaged in a sealed plastic bag with cardboard inside of it for good protection.
-Unless you want to go through the safety section, you won’t even feel the need to read the user manual.
-The saw has a nice weight and balance to it, enabling a homeowner to work single-handedly, if needed.
-Since it operates without a cord, you can work with it all over the yard without any fuss.

Disadvantages:

-Although it works fine for small jobs around the house, it’s not a perfect tool for heavy demolition.
-If you are using heavy work gloves, you will find it a bit awkward to use the trigger.

3. Black+Decker BDCR20C 20V MAX Reciprocating Saw

If you are looking to simplify the cutting tasks around your property, you should get the Black+Decker BDCR20C Saw in a heartbeat. This saw is lightweight, tough, and priced right. Seriously, it’s lightweight enough to be easily used, even on a ladder.

At the same time, the saw is powerful enough to deliver a jaw-dropping performance. With appropriate blades, it can go through thick limbs and branches like butter, which should tell you that you won’t need a lot of arm strength to operate this device.

The product description truly matches the product’s performance, which is so rare in today’s age and time. Basically, the saw is as good as you would have expected from this brand, and it arrives exactly as hoped, inside a sturdy box with plenty of cushioning around it.

Product Features:

The Black+Decker BDCR20C 20V MAX Reciprocating Saw is extremely well-designed to take care of little chores around the house. Truth to be told, the build-quality of this saw is better than what you would ideally expect at the product’s price point.

Even the batteries on this cutting device hold the charge for a long time, which means that you won’t have to stop working due to a dying battery. This thing also has a quick-connect feature for changing blades.

Keep in mind that the saw can accept most commercial blades available nowadays, enabling you to do a lot of cutting tasks independently without having to outsource the work. The size and weight of this reciprocating saw are also perfect, allowing you to work for long hours without unnecessarily straining your arms.

Advantages:

-The weight of this saw is not an overkill. With the battery installed, the saw weighs around 12lbs.
-Given how powerful it is, you will actually look forward to completing all projects that may have been overdue for long.
-If you have a healthy respect for such tools, this reciprocating saw will also last long.
-This best reciprocating saw carries a two-year warranty, which is, of course, offered by Black+Decker.

Disadvantages:

-If we were to point out a flaw, we would say that the included instructions are good but not great.

4. DeWalt DWE305 Reciprocating Saw

If you can’t put your trust on a cheaper brand, the DeWalt DWE305 Reciprocating Saw is worth adding to your shopping cart. Even though it’s an electric tool, it’s powerful enough for most cutting jobs, leaving you with no desire for an upgrade.

It works harder, longer, and quicker. Seriously, the DeWalt DWE305 Reciprocating Saw makes demolition a walk in the park. This best reciprocating saw is also quieter than other comparable saws out there.

Better still, it has this oscillating motion to it, which enables an operator to cut objects faster than usual. It’s easy and safe to use as well, which means that you will be able to complete all your projects with your fingers intact. It’s truly designed for heavy and serious use. Of course, you owe it to yourself to be careful when using it.

Product Features:

The fact that the device has a 12-amp motor, it’s able to work at a good pace for long hours without getting heated like other similar saws out there. The best part is that it stays powerful from the start to the end.

Basically, this saw doesn’t get dimmer with use. It operates at full strength all the time. Seriously, this thing can put a fight against cast iron too, provided you use the right blade for the job.

It really has no mercy for its opponents. It cuts as if there’s no tomorrow. You will also love the ease of being able to change the blades so easily and quickly. It’s perfect for big projects that don’t offer you the scope of recharging batteries.

Advantages:

-Since it’s a DeWalt tool, it’s solid and lightweight at the same time.
-Given the nice construction quality, this saw feels great in the hands. It looks good too.
-It offers a good grip, and it keeps going without bogging down in between.
-The product design allows you to aim the blade in four different directions.

Disadvantages:

-The DeWalt DWE305 Reciprocating Saw doesn’t come with blades. So, you will have to buy blades to use it.

5. Milwaukee 6509-31 12 Amp Sawzall Reciprocating Saw Kit

If you are not a fan of battery-operated reciprocating saws, you should take a shot at the Milwaukee 6509-31 12 Amp Sawzall Reciprocating Saw Kit without any second thought. This corded saw from Milwaukee delivers unbelievable speed and power like nobody’s business.

With the right blade, this best reciprocating saw can cut through just about anything out there. It’s safe to use as well. Of course, there’s no substitute for an operator’s common sense. No matter how safe a device is, you will have to use it carefully.

That said, this saw isn’t too heavy. So, even an old lady will be able to use it for anything, just like the young folks out there. Seriously, this saw is so well-built that it truly makes you feel like a pro contractor.

Product Features:

The Milwaukee 6509-31 12 Amp Sawzall Reciprocating Saw Kit is easy to operate, nicely balanced, light enough, and extremely powerful to carry out a lot of handyman projects around the house. As hinted earlier, it cuts through just about anything on its way like butter.

It’s also easy to change blades on this unit. It comes with a variable speed trigger too, which can be easily controlled by the operator. Keep in mind that this saw is proudly made in the USA, which would mean a lot to boatloads of folks out there who are not willing to settle for anything less than the best. By all accounts, getting this saw should really be a regret-free deal.

Advantages:

-Unlike the competition, the Milwaukee 6509-31 Saw can be used in a commercial environment.
-This reciprocating saw is so useful that it will pay for itself after a few uses.
-The saw doesn’t run hot even when you use it for long hours, which tells us a lot about the saw’s construction quality.
-In the consumer world, it’s hard to find such a power tool that can literally last a lifetime.
-Given how well the saw runs, it will get a lot of use for many years and beyond.

Disadvantages:

-There’s hardly any negative to crib about. Believe it or not, this saw is tantalizing close to be a perfect product.

Buying Guide

This buying guide aims to tell you everything that you need to know about the best reciprocating saw shopping. So, let’s get started with the saw shopping guide.

Corded Vs. Cordless

Corded reciprocating saws are more powerful than the cordless saws out there. Also, they don’t need to be recharged. Not to mention that they are lighter than the cordless units out there. On the negative side, you will be able to work with them only near a power outlet.

Coming to the cordless reciprocating saws, they let you forget about messy cords. You won’t even need a power outlet in sight. Also, some cordless units come with long-lasting batteries, allowing you to work for long hours without the need for a recharge in between.

Cutting Power

The reason to look out for a powerful saw is pretty obvious. A saw with a powerful motor will cut through most materials without any fuss. On the other hand, an underpowered device will struggle to cut through tough materials.

So, look at the amps of the reciprocating saw to know how powerful the unit is. Of course, you will get this information from the product description. If you haven’t noticed it yet, we have included saws with 11 to 13-amp motor. Such a power level is enough for most handyman projects around the house.

Blade Change

Being able to change blades on the fly is very crucial on your reciprocating saw. Therefore, we have carefully handpicked saws with easy to change blade system. As you might already know, dull blades will deliver lackluster performance.

On the other hand, sharp blades will offer the best quality cut. So, it makes sense to choose a saw that makes it a breeze to swap blades, causing you to work at your best potential.

Comfort Level

It goes without saying, an ideal reciprocating saw must be comfortable and easy to handle. This will allow you to work for long hours without tiring your arms in the process. Of course, look for a saw that doesn’t weigh a ton. Also, choose something that comes with a nice grip so that the tool doesn’t slip from your hands.

Finally, inspect whether or not the saw vibrates a lot. Too much vibration will make it difficult to cut precisely, especially if you are an amateur handyman.

More Shopping Tips:

-Since reciprocating saws will be used to cut different materials, it’s imperative that you choose a unit that offers you the ability to switch speed. Keep in mind that few materials can cut better at certain speeds.

-If possible, choose a unit that’s housed in a metal body because such a device will dissipate heat better than a unit that’s housed in a plastic or any other material. Therefore, you won’t have to stop in between to allow the saw to cool down.

-Check whether or not the makers are including a carrying bag in the deal. A carrying bag will make it easy to take care of the saw for a long time. Usually, when saws are kept together with other power tools, they tend to degrade faster.

-Finally, pay attention to the brand behind the product. Since we are dealing with a power tool, this is of paramount importance. After all, you would hate to see the product give up on you in the middle of a project.

Conclusion:

We hope that this article must have helped you pick up the best reciprocating saw from the myriad of choices out there. Do let us know by posting a comment below.